Question about 1997 Chrysler Town & Country
Try this and see if it works. Let me know.
Start your van. Then slide your temp lever all the way to the left (full cold). Then turn the Mode Control to 'panel' (the one that sends air to your face only). Then turn the 'blower switch' to all the way to full. Now go to the leftmost three buttons. Press the top one (rear wiper on constant) and the bottom one (rear wiper washer fluid). Hold these two for a few seconds. Once the lights come on solid then begin to flash you can let go. The AC will now calibrate. You will feel the air blow out of all the different zones at different intervals and see lights come on and go off. Then after a minute or two the top button you pressed will be slowly flashing. This means it has been completed . Press the last flashing button and you are done.
Posted on Jun 29, 2009
I FOUND THAT THIS WORKS BUT THE A/C WAS DISINGAGED IT WAS NOT BBLOWING COLD IT DIDN'T WORK WITH THE A/C BUTTON TURNED ON
Posted on Nov 10, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2012 | 2001 Alfa Romeo 147
Oct 18, 2009 | 2002 Toyota Camry
Aug 03, 2009 | 1996 Chevrolet Tahoe
May 12, 2009 | 1999 Lincoln Continental
Sep 28, 2008 | 1996 Ford Taurus
444 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: