Question about 2000 Ford Taurus

2 Answers

2000 Ford Taurus Flex Fuel V6. Check engine light is on shows code P1237, car runs fine starts fine.

Posted by on

  • Anonymous Mar 12, 2014

    1999 FORD TAURUS 3.0 DOHC RUNS ROUGH WHEN NOT GIVING IT FUEL. RUNS FINE WHEN FIRST CRANK UP OR GIVING IT FUEL.

  • Anonymous Mar 23, 2014

    CODE P1314 ON V6 CAR WAS SCANNED AT AUTO ZONE AND COUNTER MAN HAD NO INFOE ON THIS CODE. When check on line it sends me to Jag and rover sites. Car runs perfect.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

Your code is or the following. Fuel Pump Secondary Circuit Malfunction. This may involve removing your gas tank to fix. Go to the parts store and they can get you the parts you need and let you know for sure.

Posted on Jun 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,019 Answers

The official code is Ford:Fuel Pump Secondary Circuit (Fuel Pump Driver Module).
But in reality it means the relay is arcing and going bad, so replace it.
It could also be the fuel pump ground, but that is less likely.

Posted on Sep 24, 2012

  • Shari Lewis Aug 01, 2013

    its throwing P0460 which is only on the flex fuel . its a fuel guage sensor switch that is mounted under the dash behind the radto. is this considered a secondary furl pump sensor? after light is cleared how far do you drive before car resets itself or how mant different times do you start the car before it resets itself?

  • Shari Lewis Aug 01, 2013

    SORRY CALLED A FLEX FUEL MODULE

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm getting P1237 first time after replacing new fuel pump. My car; 2000 Ford Taurus DOHC 3.0 L. does not have FPMD, How I fix this code ?


Unplug and check the outside connections and look for bent, broken or corroded pins and reconnect to see if that helps.

Jul 29, 2014 | 2000 Ford Taurus

2 Answers

How I to solve a P1237 Code ?


I would start by making sure the harness was not pinched during the install of the tank. I believe the FPMD is under the rear right seat or on that side, in the trunk.

Jul 29, 2014 | 2000 Ford Taurus

1 Answer

I need a manual on the ford 3.0 liter flex fuel for my 2000 ford taurus vin code2


Click on link.http://www.automotix.net/autorepair/diy/2004-ford-taurus-repair.html

Nov 05, 2012 | 2000 Ford Taurus

2 Answers

I have a p1237 code, what does it mean. and what can i do to fix it.


P1237--Fuel Pump Secondary Circuit Malfunction

It could be an issue with the fuel pump
Also there are several other steps to follow,
before arriving at a bad pump
Most involve some type of short, detected in the
wiring along the way.That is the short explanation

You really need a diagnostic trouble chart to follow

So,you will have to seek help at a local repair shop
I wouldn't give away extra money at a dealer.

Nov 29, 2010 | 2000 Ford Taurus

1 Answer

How do you know what engine your taurus has there are three sizes?


Hello! Your vehicle is listed as a 2000 Ford Taurus...That year and model is equipped with the V6, 3.0L engine...It is either a Flex fuel or regular fuel...However, look at the eighth position of the VIN # and send the code to me...I'll send you the engine size...Guru...Saailer

Oct 15, 2010 | 2000 Ford Taurus

2 Answers

P1237 code in taraus


p1237.....fuel pump secondary circuit fault......what is the current problem that you are experiencing

Aug 31, 2010 | 2000 Ford Taurus

1 Answer

I have two code PO0171 and PO0174 it says my bank 1 and bank 2 are lean is this a problem with my fuel flex?


I have the same codes on my 2003 Explorer 4.0 Liter V6. I was told many things from bad fuel pressure to bad computer. One peice of advice was correct. Bad air fuel mixture caused by a vacuum leak. The leak could be from a bad vacuum hose or the intake gasket. Mine turned out to be a hole in an elbow vacuum hose on the top of the engine, passanger side, near the intake. Fixed and runs great with no more check engine light.

Jan 04, 2010 | 2000 Ford Taurus

1 Answer

Runs rough on startup


Run in to autozone, pep boys, or other major autoparts store & they will usually do a free code scan for you. Once you know code, easier & better/cheaper to fix, than guessing & replacing parts that are fine.

Jul 11, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
2000 Ford Taurus Logo

1,403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...