Question about 1991 Mitsubishi Eclipse

2 Answers

I have a 92 Toyota 4runner will clutch problems. the clutch Master and Slave cylingers have been replaced and it worked for about a week and now it will not shift into any gear. the clutch pedal goes to the floor it will only shift if the engine is off

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Also check to see if there is a bleeder on the slave cylinder its self youcan bleed it from there .

Posted on Oct 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 75,817 Answers

Sounds like you have not bleed all the air out of the system, bleed it again using a Mityvac brand bleeding tool.

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 Toyota 4runner clutch problems. Will not go into any gears


Replace the clutch package. You have to pull the transmission Master and slave also..

Dec 23, 2016 | 1991 Toyota 4Runner

1 Answer

Ijust got a 85 4runner and they said they just replaced the slave cylinder then they said it is the master cylinder I have to put the car in 1st or revers with the car off then.turn the.key and it just...


Joe, it probably is the master that is bad. They had to guess slave or master cylinder at the beginning, and they must have guessed wrong. Probably good that you now will have both new.

Feb 21, 2015 | 1985 Toyota 4Runner

2 Answers

My clutch wont go into any gear unless i force it.. And it grinds on going in reverse. is it the master/slave cylinder the problem. or the clutch? please help!!!


Hopefully you got a warranty with the clutch job, so I would take it back to that shop first. If you have someone else work on the truck the first shop is off the hook for responsibility. Its possible the clutch has failed, or you have developed a new problem.

Jan 17, 2014 | 1990 Toyota 4Runner

1 Answer

Gears really hard to shift 1990 toyota 4runner


pressure and clutch plate (clutch set) need to be inspected and probably replaced. be prepared for a transmission repair as well if the problem has been going on for months.

Mar 21, 2013 | Toyota 4Runner Cars & Trucks

1 Answer

92 Toyota Pick up clutch doesnt enagage after replacing clutch, and flywheel?


are you sure the driven plate is on the correct side? The clutch bearing is correct on high? Does the slave or master cylinder works ok? do they keep steady pressure when needed? Is the clutch kit the correct part according to engine type?

Nov 12, 2012 | Cars & Trucks

1 Answer

My 4runner's clutch stopped working. Where do I


Do you mean that the clutch will not disengage? If so the first thing to check is the fluid level in the clutch slave cylinder reservoir. If it's dry on fluid you'll need to refill it and look for a leak in the master cylinder, slave cylinder or the line connecting the two. You may also have to bleed the slave cylinder.

Jul 02, 2011 | 1992 Toyota 4Runner

1 Answer

85 hilux 4x4 have no clutch when checking found fluid leaking from rubber boot at the arm pretruding from gear box how do you repair this? cheers roger


bad slave cylinder possible. may even be a bad clutch master cylinder.was leaking from firewall? not bad clutch mastercylinder. was leaking under car on passenger side at front of tranny, but in between motor and tranny where motor bolts to transmission? most likely, bad clutch slave cylinder. having to add brake fluid to clutch master cylinder? having to pump the clutch pedal up to shift gears? either you have a bad clutch slave cylinder[leaking under the car between motor and tranmission] or leaking on firewall [the wall that under dash and under the front window] you may even need a clutch replacement.3 if you need further assistment,repost your question to fixya.com

Dec 26, 2010 | 1985 Toyota 4Runner

1 Answer

Replaced master and slave clutch cylinders but


if you replace and shure to make a good bleed on clutch fluid, then replace clutch disc

Jul 27, 2010 | 1991 Toyota 4Runner

2 Answers

Wont go in gear


Change clutch wire.
Change clutch plate.

Apr 08, 2010 | 1999 Toyota 4Runner

1 Answer

Transmission not going into gear


I see this is kind of a stale post, but i'll try anyway. First, check your clutch fluid reservoir. If it's full, you may have air in the line, a bad master cylinder, or slave cylinder, or your clutch is worn out.

May 11, 2009 | 1990 Toyota 4Runner

Not finding what you are looking for?
1991 Mitsubishi Eclipse Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...