what the air ride switch in a 1998 ford explorer, should it be on or off and where is it located? we were told that might be the reason why it's not starting
remove the right kick panel.thats where the air suspension located.
Comments:
Jun 29, 2009
- the switch should be on while vechicle is operating.you turn it off only when. raise the vechicle or working on the suspension.if air ride system not working check the fuse and relay.also the electrical connector.
The Key fob for my 1997 C200 has stopped working, it neither locks/unlocks the doors - or is...
(More)
The Key fob for my 1997 C200 has stopped working, it neither locks/unlocks the doors - or is detected when I put the key in the ignition. So I can not start or use the car, I have tried replacing the batteries in the Fob - but still no luck.
Any Advice?
I have a 2002 grand am, se1 3.4l. This car is costing me some money on guess work by mechanics that...
(More)
I have a 2002 grand am, se1 3.4l. This car is costing me some money on guess work by mechanics that can not seem to figure out my problem. At 35 mph and above my car seems to hesitate. It feels like it rocks back and forth and you can hear it winding, the RPM's jump up and down as well. But if I give it gas it will kick in O/D and take off with no problem. It only does it if I slowly press the gas down trying to get normal speed after a stop or hanging around 35mph or above. I had my tranny checked at AAMCO and they said it was not the tranny. I since had my plugs, wires, Oxygen Sensors, and fuel filter changed. I also tried my throttle position sensor and oil pressure switch. Still doing it. I also was told my middle coil pack was bad, changed that and same problem. I did not put cheap parts on there thinking i'd get better performance out of it in the long run. Now the big question is... I had my cat converter cut off, would that make it hesitate any? Some tell me not at all some say yes. I do get a code p0420... catalist efficiency below threshold (bank1) What is that? Cant be 02 sensor as they are new. The code was reset and came back on after a 45 min drive. I am lost and so are many people. I do not wanna pay Pontiac $108 for telling me there are no codes and they cant say. Any suggestions would help. Thanks.
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.