Question about 2000 Nissan Frontier

1 Answer

I have a 2000 nissan truck . And today my ABS

I have a 2000 nissan truck . And today my ABS light came on .Now the break light stay on when the truck is turn off ? Had to disconet the barttey to turn off the break light's .

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 218 Answers

Hey name is Keith..and you have 2 problems..from my expierence..your brake light problem is usually caused by the switch either bad or loose on the back side of your brake pedal..and your ABS light is uaually caused by a bad sensor in your brakink system that needs to be checked out by a shop..unless you are able to troubleshoot and figure out which sensor is at fault..i hope i helped..if not feel free to write back

Posted on Jun 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 bonneville trac off light and abs light stay on

The ABS light is the Anti Lock Break system light. You may have a malfunction in there. . . Take it to your qualified brake specialist and have him check it out. completely. You may have a leak in the system, the traction control is controlled by the button on the console where you can turn it off and on. If you have tried the button, take it to a car repair service or a ugh dealership and get the problem diagnosed with advanced software. Do mess with your life, fix the brakes.

Apr 19, 2013 | 2000 Pontiac Bonneville

1 Answer

What can be wrong when the ABS light stays on?

You'll need to have the computer scanned for trouble codes, and some code readers will not access body computers.

Jul 11, 2012 | 2000 Volkswagen Beetle

1 Answer

The ABS, TCS OFF,and SLIP warning lights are on in my 2000 Nissan Maxima. What's the cause and fix?

cud be dirty or low brake fluid----or bad abs module--or more------have system inspected by a brakepro soon before it cost alot or u crash

May 09, 2012 | 2000 Nissan Maxima

1 Answer

Brake lights stay on when engine is off. Pulled fuse out and replaced. Lights still stay on

I would say your break switch is stuck. It is a round chrome cylinder above your break pedal. The break stem hits it when you push down the break. Try to loosen the button. It is stuck.

Feb 17, 2011 | 2000 Nissan Frontier

1 Answer

Went through car wash and after the abs light went off so i thought got some mouisture some were but when you get out of truck the break lights stay on?its a 97 nissan pick up 2wd automatic

there is a plastic button that the brake light switch pushes against when the pedel is NOT being pressed . If it has falling out there is nothing to press on the switch in which case the brake lights would stay on also is one of the signals the abs uses

Dec 02, 2009 | 1997 Nissan Pickup

1 Answer

My 2002 maxima has the abs, slip., and tcs lights on and they stay on

could be a bad abs sensor on one of the wheels, or it just might be covered with alot of dirt, unable to get a good reading. Also if you replaced anything suspension, breaks, or axle related recently, someone might have messed up the wiring

Nov 22, 2009 | 2000 Nissan Maxima

2 Answers

The ABS light in my 2000 Nissan X-Terra just went on. From reading above I would like to check my break fluid before doing anythign else. How do I check the break fluid levels. I know nothing about cars so...

Just open your hood and the reservoir will be on the drivers side on the fire wall. It may be caked with fluid on the side but it will have lines for max and min. It should be between that point, if its low, you either have a leak or you need to do brakes.

Jul 23, 2009 | Nissan Xterra Cars & Trucks

3 Answers

Nissan Altima, horrible sound due to ABS; brakes are still good

Yes you can bypass it by removing the plugs from the abs pump.But you will have the abs light flashing.Just remove the bulb and you should be fine.

Jun 11, 2009 | 2004 Nissan Altima

1 Answer

Abs on dashboard stays lit all the time.

The only way to know axactly what happen is with a diagnostic computer.
Because the ABS use a Speed sensor on each of the wheels.
Hydraulic selenoids on the ABS box or Module..
If the light is on. its mean the Anti Lock Brake System is inactive., You gonna brake like any car with no ABS.
I hope this information work for you.

Jun 01, 2008 | 2000 Nissan Sentra

Not finding what you are looking for?
2000 Nissan Frontier Logo

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

79865 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides