At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
sometimes the bulb lens has two screws if not pull rear door or gate panel and bingo right there in the center panel twist plug and pull.sometimes the bulb lens has two screws if not pull rear door or gate panel and bingo right there in the center panel twist plug and pull.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do the park lamps work ? license plate lights get power from same fuse ! Check ground wire ! use a volt meter an do voltage drop test ! Voltage Drop Testing The fuse for the license plate lights is in the under hood fuse box -engine compartment ! fuse #12 RT PRK LAMP 10Amp .
Check the brake bulb socket for short , clean replace bulbs , check connector to rear licence plate lights . Also trailer harness for short , all on same fuse circuit .
Look behind the bumper for where the bulbs are located. Unlock the bulbs by twisting them loose. Pull the bulb out of the harness and unscrew the bulb. Replace it and lock the bulb back into the harness.
You just need to push the lights to one side, either towards the left or the right as they're held in by a metal clip that will pop out once you push it far enough over
×