Is there an simple way to acsess & remove the clutch master cylinder on a 1994 Mazda E2000 van from behind the dashboard for servicing & or replacement.?

SOURCE: mazda rx 7 rebuilt kit clutch master cylinder.

crack the bleeder nipple on the slave cyl and get some one to slowly push the pedal see if any fluid shoots out if not you may have killed the new seal in the master cyl.
it sounds like you did every thing right its just that old cylinders get were in them and if you don't hone them out and put a new sleeve in them quite often you will rip the new seal apart on the first pump of the pedal.
any way check for presser and let me no

SOURCE: mazda 1997 E2000 VAN, WIPERS

i'm no expert but to me it sounds like it could be your battery or alternator or something to do with the electrical system, have you had your battery and charging system checked by an auto-electrician?

Clint Wood

• 26 Answers
• Posted on Mar 09, 2011

SOURCE: I need the timing settings

I don't have a diagram on hand but are real simple. by memory cam and crank are both at twelve oclock. but try lookup ford econovan 2.0litre as thet are the same engine.

SOURCE: i have a 1994 mazda e2000 van, i placed the

My van doesnt have any power

SOURCE: clutch piston too short?

sounds more like a seal to me