SOURCE: honda crv 2000 computer reset
Ok,
1. ensure ignition off
2 . bridge the 2 pin connector, Put a piece of wire across both terminals
3.switch ignition on
4. SRS lamp should illuminate for 6 seconds
5.disconnect the bridge wire within 4 seconds of the warning lamp extinguishing
6.SRS lamp should illuminate 2 times, Codes erased
7.switch ignition off
8 Wait 10 seconds. switch ignition on and check SRS warning lamp operation.
hope this helps
You should just go to Honda and purchase it from them. You can go up to the parts counter and either give them your year/make/model or your vin and they will give you exactly what fluid(its the same on all A/T honda's) and the correct amount need. They made the car, they know best.
SOURCE: need code for 2000 honda crv radio. changed
Radio code is specific for each and every car.
It is specific like anti theft code.
You can get it by providing your VIN# and registration details in
authorized dealership. Nobody else can provide you. If anybody can
provide you that , then there is no meaning of security for your car.
You can verify an satisfied customer in the below link
www.fixya.com/support/t6842407-bought_2003_honda
Welcome to FixYa.com
Thank you for using FixYa.com, Regards, Lee Davidian
Thank You for using FixYa - a 4 THUMBS- UP rating is appreciated for answering your FREE question!!!!!
779 views
Usually answered in minutes!
×