Question about 1999 Isuzu Amigo

2 Answers

Adding freon to 98 Isuzu Amigo

There are 2 valve where I add the freon to my 98 Isuzu Amigo, and I am not sure which one it is that I use?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 52 Answers

You need to add the freon on the low side which is usually indicated by a blue cap. The red cap is the high side port. Never add freon using the high side port. Typically if you are buying a guage set from your local auto parts store, it will only attach to the low side service port because they are diffent types of connections. Another easy way to tell is to turn your AC on and feel the lines that the ports are attached to. The low side should be cold/cool and the high side will be hot.

Posted on Jun 28, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 235 Answers

The low side is the one you should use. It is the bigger of the two lines.

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 1999 isuzu rodeo sport 2wd v6 auto trans idle air replacement valve interchangeable with a 1999 isuzu amigo sport


double posted why, ? please add to 1 post,
by edits or comments, please'
there are 3 , v6 engines, you never said which
why ask us, about parts, we dont sell parts
and would have to read the same books on parts as you
why ask use to do that.?
here is the list
USA only, RODEO, prime examples. the GAS v6 engines. 3.1L 3.2L 6vd1 SOHC, one cam per head, then the optional... 6vd1w DOHC, 2 cams in one head, w = DOHC optioned heads, then came... 3.5L (a stroked out, 3.2L.) 6ve1 are all DOHC engines. and have 24 valves. (6x4) with 2 rear cam sensor, used for VVT and spark both,
the engines must match ,to mix parts

here im at isuzu.com parts page
note it changed on August 99, mfg build dates. so.....
tricky
this will not cause low MPG
it will cause idle controls to be dead.
why not post all symptoms, first. and stop guessing?

iac-oxkqb5rw1cdtny1acrjczugf-5-0.png

Feb 12, 2017 | 1999 Isuzu Amigo

1 Answer

98 Isuzu amigo will start then idle reply rough and then die


find your IAC and clean it first. then check your MAF and clean it. then ever think about giving it a tune up ???

Sep 07, 2014 | 1998 Isuzu Amigo

1 Answer

1988-1992 12V or 24V


Isuzu models sold in the US are all 12 volt. I am assuming your vehicle is from another country if it is 24 volt.

Aug 23, 2012 | 1988 Isuzu Trooper 2 Door

2 Answers

1998 isuzu amigo 2.2l 5 spd 4 cyl .\r\ni need to


in all fuel injected cars you do not adjust idle. All you can do is clean the throttle and replace the Idle Air Control valve and check data thru a scanner to see if any sensors are out of specs. If this car has a maf sensor in the air filter tube it could become contaminated and cleaning or replacemnet will allow it to see more air which in turn allows the computer to add more fuel for better idling and accelration.

Jun 11, 2010 | 1998 Isuzu Amigo

2 Answers

2001 Isuzu Rodeo LS after adding Freon A.C runs warm and cold


It sounds like by adding refrigerant to the system it may be over pressurizing. When this happens it will cycle on and off.

You will need to hook up a set of manifold gauges and monitor the high and low pressures to see what is happening.

Jul 28, 2009 | 2001 Isuzu Rodeo

1 Answer

98 isuzu amigo starter removal


Could someone please answer this? I'm having the exact same problem.

Oct 11, 2008 | 1998 Isuzu Amigo

1 Answer

Code P1441 check engine light


Always check in at Planetisuzoo.com Hundreds of pros always ready.

Jun 26, 2008 | 1998 Isuzu Amigo

Not finding what you are looking for?
1999 Isuzu Amigo Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...