SOURCE: chevy s10 4 wheel drive will not engage
There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.
SOURCE: WHERE DO I LOCATE THE EGR VALVE ON MY 2001 CHEVY IMPALA 3.8 V6
The egr valve is located at the end of a hose that plugs into youe valve cover. It is pushed right into a rubber grommet that is located in one of the valve covers. I hope this helps. don.t forget to rate my nswer, thanks
SOURCE: getting to the egr valve 2001 chevy venture to change out
Try “autozone.com” or your local library for diagrams and step by step instructions.
SOURCE: need the fuse diagran fo chevy blazer s10 4wd 1991
go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!
SOURCE: i have a 2003 chevy impala i changed the egr valve
The code in the ECU might not have reset after you changed the EGR. Try unhooking the battery and let the car sit for a couple minutes and then hook it back up and see if the light goes away.
445 views
Usually answered in minutes!
×