Question about 1993 Toyota Camry V6

Open Question

How to disable airbag in 93 Toyota Camry - 1993 Toyota Camry V6

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
fastboyz
  • 674 Answers

SOURCE: switching engines

if you call a salvage yard they have a interchange manual called a hollander book and it will tell you every thing you need to know even if its a close match and just have to change a few items.
good luck
paul

Posted on Sep 19, 2008

Ad
  • 98 Answers

SOURCE: How to remove ignition cylinder from Toyota Camry 1993

Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!




  1. Disconnect the negative battery cable. If equipped with an air bag, wait at least 90 seconds before working on the vehicle.
CAUTIONSome models covered by this guidemay be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in .
  1. Remove the lower steering column cover. Unfasten the ignition switch connector under the instrument panel.
  2. Remove the screws which secure the upper and lower halves of the steering column cover.
  3. Turn the lock cylinder to the ACC position with the ignition key.
  4. Push the lock cylinder stop in with a small, round object (cotter pin, punch, etc.).
On some vehicles, it may be necessary to remove the steering wheel and combination switch first.
  1. Withdraw the lock cylinder from the lock housing while depressing the stop tab.
  2. To remove the ignition switch, unfasten its securing screws and withdraw the switch from the lock housing.
To install:
  1. Align the locking cam with the hole in the ignition switch and insert the switch into the lock housing.
  2. Secure the switch with its screw(s).
  3. Make sure both the lock cylinder and column lock are in the ACC position. Slide the cylinder into the lock housing until the stop tab engages the hole in the lock.
  4. Install the steering column covers.
  5. Connect the ignition switch wiring.
  6. Connect the negative battery cable.

Posted on Nov 23, 2008

66 chrgr
  • 1011 Answers

SOURCE: antifreeze color in 93 camry

in 1993 the antifreeze was green .are adding or doing a job were the coolant must come out .i hope this helps

Posted on Feb 01, 2009

jagjeffery
  • 318 Answers

SOURCE: 93 Toyota Camry. wouldn't start, so I jumped the

Yes you have a charging problem more then likely it is the Alternator

Posted on Jun 12, 2009

Shorty1_wt
  • 324 Answers

SOURCE: disable airbag light on a toyota paseo?

you could remove the instrument cluster from the dash and unplug / remove the light, or go the easy way and use a piece of electrical tape and cover it. as far as disabling it I would think the only way would be to reprogram your ECM

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there an Airbag Recall for a 2000 Toyota Camry LE?


The only recall items I could find for that vehicle were Headlights, and accelerator cable defects. Those are probably expired by now...14 yrs. later.

I’m happy to help further over the phone at https://www.6ya.com/expert/robert_24775b73ca70da93

Oct 20, 2014 | 2000 Toyota Camry

1 Answer

93 toyota camry ignition lock up


try turning steering wheel back and forth while turning the key if does not make it turn you will need a key tumbler ,possible repair by a lock smith

Jan 25, 2013 | 1993 Toyota Camry

1 Answer

Airbag warning light doesnt come on 2001 toyota camry


bulb could be burned out.if you have any problems with airbags.let dealership check it out.could be bulb.

Dec 24, 2012 | 2001 Toyota Camry

1 Answer

98 toyota camry srs/airbag trouble code B0106 .i need to know what they are calling a passenger sqibb circuit


The 'passenger side squib circuit' is the wiring that goes from the center airbag computer (under the center console) to the passenger side airbag.

Feb 08, 2010 | 1998 Toyota Camry

1 Answer

Airbag light 1992 camry


There is a fault int eh airbag system on one of the sensors or the airbag itself. You need to have this checked by a mechanic as it is possible to trigger the airbag if the test is done incorrectly.

Oct 12, 2009 | 1992 Toyota Camry V6

3 Answers

Need to find location od thermostat on 93 camry


try these websites www.autozone.com and www.alldatadiy.com and you should be able to get the information you need.

Jun 30, 2009 | 1993 Toyota Camry V6

1 Answer

93 Toyota Camry. wouldn't start, so I jumped the


Yes you have a charging problem more then likely it is the Alternator

Jun 12, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...