Question about 1998 Toyota Corolla

1 Answer

I replaced the power window switch, but the window stll will not roll back up. Now what?

Posted by on

  • flaco_66 Jun 28, 2009

    Sorry. let me clarify. The window rolls down just fine, but will not roll up. I try to the button over and over and it will roll up about and inch and stops. The window will roll up after many trys, but takes a long time. I bought a new switch, but it is still doing the same thing. Is there a relay that could be bad?

  • flaco_66 Jun 29, 2009

    Thanks. I will try that.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 235 Answers

Your cable on the actuator motor might be tangled or off the track. If it is, the motor will need replacing.

Posted on Jun 28, 2009

  • Gilbert Martinez Jun 28, 2009

    sounds like the cable is tangled on the actuator. Take off the door panel and you will be able to see the the cable.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi all,hyundai get some times power window doesn't roll back when I open door panel then It roll up for a while it does roll down but don't roll up any way to fix this


Sounds like a power window motor. Sometimes this will help diagnose your problem for the mechanically uninclined. While holding the switch to power the window while the window is stuck, just bank on the inside of the door panel for that window without causing damage. Sometimes this will jar the motor and it will start to move. This is a sign of a bad power window motor. It may also be a switch as the alternative problem but most likely the power window motor. I recommend replacing the window motor and window regulator at the same time. You can usually buy both together.

Mar 16, 2016 | Cars & Trucks

1 Answer

I have an EOS VW 2009 and it had 5 window switches in the driver side door to the front windows and back windows and a switch to push all four windows down/up at the same time. But right now my passenger...


Hi Kimberli,

I suspect that since all windows can be powered up and down, you have issues with I believe 2 specific switches you mentioned that have problems - as a result of possible rain water, melting snow / ice or spillage of beverages. You might be able to clean them up - or replace the ones that are "flaky"

Good luck!

Mar 12, 2015 | 2009 Volkswagen Eos

1 Answer

1995 Ford Taurus front passenger window went down and won't roll up


Remove the switch panel and check to see there is 12V power there.. If there is Push the switch and see if the power comes out of it to drive the motor, if the power is not present check the wire back looking for the short.. usually if the power is missing none of the windows will work. look where the wires come out the door post to the door. look at fuses, If there is power and it does not come through the switch when you push the switch. the switch might be bad. in which case jump the switch to roll window up and buy a new switch (rock auto.com) if you apply 12v power and the window still will not go up.. you will need to replace the motor. not a hard job. you must remove door panel and remove regulator and motor and replace and reinstall. either junk yard part, craigslist part or new at Rock auto.. Post a comment and let us know what happens.

Aug 19, 2014 | 1995 Ford Taurus

1 Answer

When I replaced ignition switch in a 2000 buick centery I stll cannot get power to starter and power windows ,gas guage and radio don't work


Sounds like the Ignition switch wasn't the problem, check your fuse links at starter, they are soft fuseable wire that will burn if shorted or even when they get old over time they will go bad. they are the smaller like #10-12 ga. wire , should be at least 1 maybe 2 of them at harness connection to starter.

Aug 30, 2012 | Buick Century Cars & Trucks

1 Answer

Back driver side window will not roll up. Has power windows.


well if will it roll up with any of the swithches driver main switch and or switch on that door if neither switch will put up that window then you going to need to replace your power window motor in the back door. always check your fuses and relays first thought

if it helps please give me thumbs up

May 06, 2011 | 2002 Buick LeSabre

2 Answers

Right front door window will not roll down.


Assuming it's electric, it could be the switch or the window motor/regulator. If possible try swapping the driver's side switch to the passenger's. If it works - switch, if it doesn't, most likely the window motor, located behind the door panel.

Jan 24, 2011 | 2003 Dodge Caravan

1 Answer

The power window switch on the driver's door of my 2005 civic hybrid for the right rear passenger window only rolls the window down, not up (the switch on the passenger window door works fine). I'm having...


If your window rolled down than means your window regulator is getting power. It's most likely your switches are bad.

When you use the down switch it supplies power to your window regulator. When you use the up switch it supplies power also but the polarities are switch which causes the window to roll in the opposite direction.

Sounds like your up switch is not making a complete connection to make your window roll back up.

For parts, check this LINK.

Good luck.

Jun 02, 2010 | 2005 Honda Civic

1 Answer

Rear Window Malfunction on my 1993 Eddie Bauer Bronco I have a rear window problem on my 1993 Eddie Bauer Bronco. I rolled my rear window up last night with the rear key switch. Today it will not roll...


The dash switch can affect the operation of the rear key switch. 1st thing to do is replace the dash switch and that will prob fix it all.

Nov 16, 2009 | 1992 Ford Bronco

2 Answers

1994 jeep grand cherokee power window problem


most of the time it is wires in the drivers door that break in the loom

Feb 20, 2009 | 1994 Jeep Cherokee

1 Answer

Power window will not work


Test the window switch for proper operation at both switches, if neither works then you will have to replace the power window motor.

Oct 02, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
1998 Toyota Corolla Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...