- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Camshaft setting tool put in position(rocker cover off) pump locking tool inserted, top dead center mark on flywheel in correct position.if not correct something won't line up
The most likely cause is a worn bore and the oil is leaking past the rings. It is possible that the oil is entering the combustion chamber through a breather.
dear . you need to replace cable between steering and steering col um . around cable can be fix after you check the turn to right and left should be same .check all fuse . ( this cable cut out and connect to ground now
You do not have the air bled out or the slave is also defective, suggest you replace the slave then try again using a vacuum clutch bleeding tool like the one make by a company called MITYVAC
×