Question about 1991 Chevrolet S-10 Blazer

1 Answer

How do you test ingition coil - 1991 Chevrolet S-10 Blazer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Disconect coil completley find the positive on the coil conect it to the positive on battery colil output should be close to a good grounding surface or a coil lead plugged into the coil tower and the other end of coil lead very close to a ground surface then attach a wire to the negative side of coil ready?....making sure coil output is close to a ground surface or the coil lead is very close to a ground surface take the wire u just conected to negitive side of coil and hold it on the ground side of battery for about 1-1.5 seconds and release and the coil should fire as u release the wire from neg side of battery

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 2007 chevy uplander the past week the car was feeling a little shaky when stopped 2 days ago it started shaking more driving and stopped yesterday the check engine came out in the dash i...


Have a shop do the necessary testing, to find a problem

You don't change parts based on no testing & certainly
put no faith in autozone or anything free, is of no use to you

May 09, 2014 | Cars & Trucks

1 Answer

How to test a ignition coil



what a good way to test an ingition coil on a 97 land rover discovery

Jan 10, 2014 | Cars & Trucks

2 Answers

96 sierra 4x4 5.7, no spark, no fuel, only have .4 volts at ingition module, coil, and 10A ign fuse. Door locks don't engage when turn key,


Something wrong in the fuse box if you only have .4 volts at the fuse. Maybe a loose terminal in there.

Aug 04, 2017 | 1996 GMC Sierra

1 Answer

Car wont start no spark at plugs


if distributor model check coil feed to distributot for spark this is done by grounding the coil wire. if coil module feed then check power to coil module if no power then your problem is outside the engine area in the ingition or fuses ect many possibilities

Oct 20, 2012 | 1990 Toyota Camry

2 Answers

P0354 Ingition coil D primary/Secondary circuit


A,B,C,D

1,2,3,4

D -cylinder #4

I assume you mean what coil

Jul 14, 2011 | Mazda Tribute Cars & Trucks

1 Answer

Want to know where my module and ingition coil located


The coil is right beside the distributor cap (follow center wire on cap,goes to coil) and the module is inside the housing of the distributor cap(remove the cap with torx screws.)

Jan 01, 2011 | 1992 Chevrolet K1500

1 Answer

91 tempo wont start. has spark,fuel is pumping and no fuses blown. what else can i check


check that little ingition wire going to the ingition coil give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Mar 27, 2010 | 1991 Ford Tempo 4 Door

1 Answer

No fire from ingition coil


are you saying that you have 12 volts to the coil but no spark out/if this is the case first make sure the cam is turning by looking in the oil cap hole,next yes the cam sensor is a common failed part and can cause the problem, you also have the crank sensor just below that and it would not hurt to replace also

Aug 05, 2008 | 1993 Volvo 850

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...