Question about 1998 Plymouth Grand Voyager

2 Answers

Are the wheel bolt pattern the same as a 1996 plymouth vayager as the 1998 plymouth voyager

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,982 Answers

Probably...check your spare tire against the new ones...may even fit Jeep.

Posted on Jun 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 2,984 Answers

Yes, they are the same.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im looking for a transmission wiring diagram for a 95 plymouth voyager se with the 3.3l engine


Plymouth Voyager Repair Manual / Service Manual Online ...

? 0:43
https://www.youtube.com/watch?v=2GqbKAZhMcY
Dec 14, 2014 - Uploaded by Tanner Jackson
If you need a Plymouth Voyager repair manual, you're in luck. ...steering, suspension, engine, transmission, air conditioning, heater, or something ... 1994, 1995, 1996, 1997, 1998, 1999, 2000 (90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00) .... Plymouth VoyagerDodge Caravan 1996 19971998 1999 2000 3.3L ...
images for wiring diagram plymouth voyager

Nov 28, 2015 | Plymouth Cars & Trucks

1 Answer

Fix sliding side door plymouth voyager


It maybe because its off an earlier model so slightly different.

Mar 11, 2014 | Cars & Trucks

1 Answer

Head bolt Torque specs for a 1998 Plymouth Voyager


according to the manual

Step 1: Bolts 1 - 8 to 61 N·m (45 ft. lbs.)

† Step 2: Bolts 1 - 8 to 88 N·m (65 ft. lbs.)

† Step 3: Bolts 1 - 8 (again) to 88 N·m (65 ft. lbs.)

† Step 4: Bolts 1 - 8 turn an additional 1/4 Turn.

(Do not use a torque wrench for this step.)

NOTE: Bolt torque after 1/4 turn should be over 122
N·m (90 ft. lbs.). If not, replace the bolt.

Nov 25, 2010 | 1998 Plymouth Voyager

1 Answer

TORQUE SPECS. AND PATTERN FOR PLYMOUTH 2.4 LITRE I4


Are you asking for the wheel torque specs. or some other part of the car such as the engine head bolts etc.?
If it is the wheel lug nuts they are 80-100 ftlbs. and you should go in a criss-cross pattern. For example if you have 5 lugs nuts and the top one is say number one 1 I would go in a clockwise direction doing 1, 3, 5, 2, 4 then repeat. If you have four then it is 1,3,4,2. Hope this helps.

Aug 20, 2010 | 1998 Plymouth Voyager

1 Answer

I've removed the passenger side knuckle, can't get it to go back on?


clean the debris out of the hole the center of the hub bearing slips into...
then , hold the hub on there while treading the bolts in .. once all four bolts are engaged turn each bolt a little using a criss cross pattern to pull the hub into the hole straight.

Jul 16, 2010 | 1998 Plymouth Voyager

1 Answer

Half Shaft


pull off hub cap remove circlip in the nut if there is one, then loosen axle nut. Need a breaker bar and wheel on the ground. once nut is off loosen lug nuts, jack up car on side . bolts #10 Tork on some models then remove. Remove lower tie rod end remove bolt and nut. remove rotor and 2 Caliper pull out on the bolt. push lower control arm down with a bar and pull strut Assembly out away from car. next pull axle out using a flat bar to shove the axle out of transmission. install is in reverse.

Mar 23, 2010 | 1996 Plymouth Voyager

1 Answer

What is the torque specs for the transmission oilpan on a 98 plymouth grand voyager/


You don't really need exact specs on that but it is usually around 14 inch pounds... Just use a nut driver or 1/4 in drive ratchet and use a cross pattern on the bolts, not a circle. do not tighten anything 'till you have every bolt in and verify that it goes in easily. Be careful to not crush the gasket, after you get the fluid in, watch for seepage and tighten up wherever you see any . Most important to remove all old gasket material from both pan and trans rail that is the primary cause of leaks.

Jun 19, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Transmission


No, the bolt pattern between the 3.3 and the 3.0 is different.

Apr 08, 2009 | 1996 Plymouth Grand Voyager

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...