New neautral saftey switch in my 1996 dodge ram1500 and still will not start park?

It's only suppose to start in park or neutral !

I'm looking for a diagram of a fuel pump for a 1996 dodge ram1500

You need to adjust the park neutral saftey switch. the problem you are having is the truck thinks the it is not in Park so the truck will not start unless it is all the way in park. Take the keu turn half way and move shifter to neutral and see if it starts. Then I cam tell you how to adjust it.

sounds like you have a throw out bearing out. Put in neautral and depress pedal while idleing if noise starts its throw out bearing in clutch if noise is there when clutch is out in neautral its probly front trans bearing either involves removeing transmission and replaceing clutch assy or front bearing

Neutral Saftey Switch located on top of your transmission. Costly to replace but often can be taken off and cleaned.

IF YOU HAVE TRIED IN PARK AND NO LUCK TRY IN NUTURAL IF NO LUCK YOUR SHIFT SENSOR ON THE SIDE OF YOUR TRANSMISSION COULD BE OUT OF ADJUSTMENT

Sounds like the shifter linkage needs adjusted. There is a neutral saftey switch that prevents the car from being started in any foward or reverse gear. If the shifter linkage is out of adjustment, the neutral safety switch will give you starting problems.

Your neutral saftey switch is broken. This is the switch that ensures the car is either in park or neutral when you start it. The switch for the park is worn out.

WHAT??? NEAUTRAL.. IF THATS THE CASE YOU NEED A NEAUTRAL SAFETY SWITCH.

hi my name thomas

your car has a broken or faulty neutral switch.
the neutral switch is located under you gear desplay next to the gear shift (t-bar).
the job of the neautral switch is to prevent the car from starting in a drive or a revearse gear which would allow the car to move.
it is a saftey precaution for the driver

hope i could help fix the problem and explain why it is a problem