Question about 1996 Chevrolet Camaro

1 Answer

1996 CAMARO BLOWS HEADLIGHT EVERY 6 MONTHS

THE PASSENGER SIDE LOW BEAM HEADLIGHT HAS TO BE REPLACED ALMOST EVERY 6 MONTHS.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Ive had 2 camaros and both did this. remove the headlight and take the bulb out of the back of the sealed beam. be careful not to break it as its glued in, but it is possible. just be gentle and patient. replace the bulb with an aftermarket 9006 bulb (hi beams are 9005) and silicone it back into the housing. i haven't had one burn out yet after doing this

Posted on Jul 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

2007 jeep compass low beam doesnt work


Check the fuse for that side yes you have a fuse for each high and low beams for each side

Mar 26, 2013 | 2007 Jeep Compass 2.4

1 Answer

1998 Lincoln Town Car passenger side headlight low beam only.


Hi Steven, I guess you have checked the fuses? Some time (and I'n not saying this is your problem) the fuses are wired in such a way that if one blows (and the fuse is on the earth side of the circuit) there will be an output, but the circuit will either use the earth through the the other bulb or fail to earth. I would also suggest having a look at the relays and their operation. Lastly, check the earth connections again. Regards John

Sep 22, 2012 | 1998 Lincoln Town Car

1 Answer

92 Toyota Camry Passenger side headlight only works with HigBeam


You need to get a volt meter at the headlamp plug (Wiring harness) to see if you got a ground, power from the low beam wire, and then power from the hight beam wire. It's the best place to start.

May 13, 2010 | 1992 Toyota Camry V6

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

Passenger low bean headlight doesn't work. The


You will need to provide what year car, engine size, ect so a diagram can be found to help you.

Dec 16, 2009 | Hyundai Sonata Cars & Trucks

2 Answers

Lowbeam headlight not working


my 2004 s60 has a message of "BULB FAILURE LOW BEAM" i have just replaced both low beams 2 months ago. before it was just out on left side and again it is only the driver side that is out. Does anybody know if this is a reoccuring problem in '04 s60 models? How do I fix it?

Sep 11, 2008 | 2004 Volvo S60

Not finding what you are looking for?
1996 Chevrolet Camaro Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...