Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 07, 2014

I need to find a spark plug wiring diagram for a 2003 4 cylinder S10

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 16, 2008

SOURCE: plug wire diagram

This was all I could come with, hope it helps.



ebead53.gif

Ad

Anonymous

  • 2 Answers
  • Posted on Nov 28, 2008

SOURCE: Engine Wire diagram for S10

go to autozone.com and you can register any type car and they have pretty good prints and service manuals on line. I have an 89 chevy s10 I just rebuilt my motor and overhauled the complete truck just waiting on a new paint job. best of luck

Anonymous

  • 462 Answers
  • Posted on May 31, 2009

SOURCE: need a diagram of the firing order of spark plug wires from coil packs to spark plugs

FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Aug 26, 2009

SOURCE: I have a 1991 Chevy S10 2.5 L4, do you have a

firing order 1342, distributor, clockwise rotation.966cbd7.jpg

Testimonial: "you were a life saver, this is just what I needed thanks"

Anonymous

  • 1985 Answers
  • Posted on Nov 26, 2009

SOURCE: need a wiring diagram for a chevy s10. brake

your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I'm needing a diagram for the spark plugs

Here is the firing order and spark plug wire routing diagram for a 2006 Chevy Impala LT 3.9 V6:
Firing order: 1-2-3-4-5-6
Spark plug wire routing (starting from the driver's side):
  • Cylinder 1: connect to the coil tower closest to the driver's side headlight
  • Cylinder 3: connect to the coil tower next to cylinder 1
  • Cylinder 5: connect to the coil tower next to cylinder 3
  • Cylinder 2: connect to the coil tower closest to the passenger side headlight
  • Cylinder 4: connect to the coil tower next to cylinder 2
  • Cylinder 6: connect to the coil tower next to cylinder 4
Note: Make sure to route the wires properly to avoid cross-firing.
1helpful
1answer
0helpful
1answer

Need a spark plug wiring diagram for a 2003 Chevrolet Truck S10 P/U 2WD 2.2L FI OHV 4cyl

https://www.autozone.com/diy/repair-guides/s10-pickup-sonoma-2000-2004-firing-orders-repair-guide-p-0996b43f803714ef
0helpful
1answer

I need a wiring diagram for a Chevy S10 pickup for the transmission.

Chevrolet S10 Pickup 2003 - SYSTEM WIRING DIAGRAMS

https://portal-diagnostov.com > 2020/05/01 > transmissi...

May 1, 2020 - TRANSMISSION 2.2L VIN H 2.2L VIN H, A/T Wiring Diagram, 4L60-E 4.3L VIN W 4.3L VIN W, A/T Wiring Diagram, 4L60-E 4.3L VIN W, Transfer Case ...
1helpful
1answer

What is the firing order for a 2004 suzuki aerio 2 ltr 4 cylinder

Suzuki firing order diagram spark plug wires Cars & Trucks ...

www.fixya.com > ... > Cars & Trucksfiring order for a 1992 Suzuki Sidekick 4 cylinder 16valve The firing order is 1, 3, 4, 2. ... I have a 2003 Suzuki Aerio and it stopped running. ... firing order diagram 2004Suzuki Forenza firing order diagram which engine?, but all 4 bangers not ... ...firing order for plug wires 2007 suzuki forenza 2.0 engine Look at the engine.
2helpful
1answer

Spark plug wiring diagram for 92 trailblazer

For the 1992 S10 Trailblazer: 4.3L V6:

Firing Order:
1-6-5-4-3-2
Cylinders:
.........(back).........
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
........(front)
Distributor:
... (back)
(+).4....3
5.............2
....6.....1..(+)-screw

Let me know if this helped...
1helpful
1answer

STARTING PROBLEMS WITH CHEVY S10 2003

first you need to check if your are getting spark, then go to fuel pressure, you should have 60lb of pressure
0helpful
1answer

Spark plugs

I believe you will need a 3/8 spark plug socket. removed spark plug wires. remove spark plugs and install new plugs. Tightening torque is 27 Nm then reinstall spark plug wires with corresponding cylinder left to right goes 1-4.
5helpful
1answer

Plug wire diagram

This was all I could come with, hope it helps.



ebead53.gif
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...