Question about 2008 Dodge Ram 3500

1 Answer

How to loosen belt tighner - 2008 Dodge Ram 3500

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

There should be a bolt going through the idler pully you just clamp a socket and breaker bar to it and turn

Posted on Jul 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you loosen a power steering tensioner on a 86 Chevy caprice?


I've got an 85 2.5 celebrity and am assuming that your 86 is similar. Most people might think this is a incorrect question, but I've spend hours trying to locate all the bolts to loosen. The alternator belt is straightforward. Loosen the alternator bolt in located in the slider portion and the pivot bolt (15mm on mine). The compressor belt is straightforward. Loosen the two compressor adjustment bolts in the slider slot and the loosen the pivot bolt. This belt will be hard to remove even with the compressor fully pushed down. Take some vitamins. The worse belt by far is the power steering belt. Loosen the pivot bolt on the bottom of the power steering "canister". There are two adjustment bolts to loosen from my memory. The one that is easy to find is on the engine side of the power steering canister. The other is hard to see but is located on the pulley side between two of the pulleys. It's also hard to get a wrench on. But, you've got to find and loosen this bolt. I cringe when this belt breaks. Good Luck!!

Jul 10, 2015 | Cars & Trucks

1 Answer

Replace alternator belt


To replace the alternator belt, you must first remove the Power Steering/Air Conditioner belt. The tensioner for this belt is on the left side of the engine (when viewing from the transmission end). Loosen the tensioner pulley center bolt and then loosen the adjusting bolt. Then the alternator bolts must be loosened and the adjusting bolt for the alternator must be loosened.
Reverse procedure after installing new belt/belts.

Apr 23, 2012 | 2002 Hyundai Santa Fe

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

1 Answer

What do i do to get new belt on


FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Oct 07, 2010 | 1996 Nissan Pickup

2 Answers

How do you change alternator belt on 1997 mazada 626


heres a diagram to help you, loosen the bottom bolt a few turns then loosen the top bolt then loosen adjusting bolt to loosen belt, use the adjuster to tighten the new belt then tighten top and bottom bolts, hope this helps,8a841eb.gif

Oct 04, 2010 | 1997 Mazda 626

2 Answers

WHAT BOLTS DO I LOOSEN TO GET FAN BELT ON 1992 JEEP CHEROKEE 6 CYLINDER. I HAVE THE BELT ON PRPERLY AROUND THE 1ST 5 PULLEYS. BUT THE UPPER RIGHT PULLEY HAS TO BE LOOSENED IN SOME WAY TO GET BELT ON. HOW...


the power steering pump has a seperate adjuster bolt ont the bottom left of the pump if you loosen this off then loosen the pulley bolt it iwill move in to allow for the belt then tighten the adjuster bolt till the tension on the belt only allows for a 1/2 inch movement up or down then tighten pulley bolt
not the pump may be stiff to move at first

Feb 08, 2010 | 1992 Jeep Cherokee Sport

1 Answer

2001 kia sportage need to get info on how to change the timing belt, 2.0 motor forward facing motor, needs power steering replaced, timing belt.


Hi there,

Below are the steps..

Disconnect the negative battery cable. Remove the two fresh air duct mounting bolts on the radiator. Loosen the fresh air duct clamp at the intake housing. Remove the hose at the resonance chamber. Remove the frech air duct. 2bea4d1.jpg Remove the five cooling fan shroud bolts. ab00c68.jpg Remove the four thermo-modulated fan nuts. Remove the four thermo-modulated fan cooling fan shroud at the same time. 289c5ca.jpg Loosen the two generator mounting bolts(A and B). 2a96c03.jpg Loosen the generator drive belt from the generator by loosening the adjusting bolt(C). Remove the generator drive belt. Remove the fan pulley. Remove the four splash guard mounting bolts and splash guard. f912ce0.jpg Loosen the A/C idler puller nut(A). c0690b5.jpg Remove the A/C drive belt by loosening the adjusting bolt. Loosen the power steering pump lock bolt and mounting bolt. 843d3b3.jpg Remove the power steering belt. Remove five bolts and the upper timing belt cover. Refer to Timing Belt. Remove two bolts and the lower timing cover. Refer to Timing Belt. Loosen the tensioner lock bolt and pivot the tensionder pulley outward to remove the tension from the timing belt, then re-tighten the tensioner lock bolt. 7ca4ca0.jpg NOTE: Tightening Torque : 27-38ft·lbs(37-52N·m) Mark the timing belt rotation for proper reinstallation if it reused. Remove the timing belt. Be careful not to allow oil grease on the belt. c5d4c02.jpg Regards, Jeep Brainy

Sep 16, 2009 | 2001 Kia Sportage

2 Answers

2005 Nissan Sentra 1.8S, with AC - how to replace belts?


first of all you don't have to loosen the pulley,this will no solve the problem,well you already loosen the adjuster,good,bot thing you have not done i will tell you now,on the power steering pump where the belt pass there is also a bolt that hold it ,you must loosen that also,then after you will see the pump moving on the two position that means you will see the belt loosen on 1 position an d the position it will tight the belt,try that man.............

Aug 23, 2009 | 2005 Nissan Sentra

1 Answer

How do you loosen the rear belt?


book says to loosen alternator. Loosen the alt. bolts then **** the belt. the alt should slide and allow you to remove the belt.

Jun 16, 2009 | 2005 Nissan Sentra

1 Answer

How do you take tension off belt tighner


On your engine you should have what is called a tensioner pully. You will need a 3/8 or 1/2 in drive breaker bar or ratchet to releave the tension. It should be done easly and replacement is a breeze

Feb 02, 2009 | 2000 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...