Question about 1992 Ford Explorer

2 Answers

Is there a pin or sumthing that needs to be removed to get the large nut off the front roter

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Yes a split pin in the middle of the nut

Posted on Jul 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

There is a slide in lock in the nut use a magnet to pull it out

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replacefront leaf springs on toyota hilux dualcab4 x4


undo the 2 small retainer studs from the pin-plate. Place a nut on the thread of the pin and do up partway Ensure that the vehicle is placed on stands with the wheels just touching the ground so as to relieve all tension in the springs. Hammer the nut on the pin . It will also help if you use a pair of stilsons on the plate twisting while hammering. The plate will move out revealing a large hole on one side . When the pin moves freely remove the nut and hammer on the plate. As to the front swing shackle remove both nuts and with a bar between the spring and the hanger hammer the plate and pins out. undo the spring u- bolts and remove the spring Note-1--- do one side at a time as it retains the location of the front axle for spring replacement. Note--2---Hilux springs are bad for sagging so have an extra leaf fitted under main leaf Note--3-- do not use eurothane bushes as they will crack the chassis in adverse conditions.

Apr 27, 2013 | Toyota Cars & Trucks

2 Answers

I cant get the axle nut off to take the roter off the front wheel


A large breaker bar and deep well socket is required to get the axle nut off. They are torqued down very tight-about 150 ft. lbs. Easier to loosen the nut sith the car and wheel on the ground, then you can raise the car, remove wheel, remove the nut and washer, and get to the rotor.

Nov 27, 2012 | 2007 Suzuki Grand Vitara 4WD

1 Answer

Replacement of wheel bearing 2004 saturn ion


Put the car's front on jackstands(front suspension hanging down) and chock the rear wheels.Remove the tire/wheel.Remove the bolt/nut for the lower balljoint.Remove the cotter pin on the large spindle nut.Remove the nut(you'll need a 1/2 or larger impact gun with the correct impact socket).Dislodge the ball joint from the knuckle(a large punch rapped on the sides of the knuckle hole will help to break it loose).Lower the control arm and pull the knuckle outward(the axle shaft should now slide out).Now you should be able to remove the bolts that retain the bearing assembly.Reassemble in reverse order,thread locking compound on the bolts for the bearing is probably a good idea.

May 25, 2012 | 2004 Saturn ION

1 Answer

Replace front hub bearings on 2002 chevy monte carlo


road wheel off, brake caliper removed from rotor disc, remove cap in middle of rotor exposing the bearing retaining nut, remove split pin that holds the nut from turning and wind off the large nut, once nut is removed you can remove the rotor and bearings, the rear roller bearing at the rear of the rotor may need to be levered off with a screwdriver, should come off easy, replace in reverse order

Jun 11, 2010 | 2002 Chevrolet Monte Carlo

3 Answers

Removing Lug bolt plate from car


HI:
Stop!!! The "round plate" that the wheel studs are mounted to is your hub assembly. To replace a broken stud, you simply need to use a hammer and a drift pin punch, and pound it backwards. You replace it in similar fashion: insert the new wheel stud in from the back side of the hub, and use the wheel lug nut to draw the new stud into the hub assembly.

Mar 26, 2010 | 2006 Hyundai Elantra

3 Answers

How do you know if your front wheel bearings are going out i have a 1967 camaro


Jack up the vehicle, grab the tire from the top and bottom....side to side and try to move it. If the tire and rim move in any dirrection while observing the hib, your wheel bearings are in need of replacement. You may want to remove the hib assembly and inspect. It is not a real diffucult job to perform, and replacing the bearings and seals would not hurt or harm a thing if they are suspect.

Mar 20, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

How do you remove the front rotors? is there a retaining screw that I am not seeing


On the very center of the wheel: is there a Cotter Pin, Nut Locking Cover, and Large Nut?
Remove the Cotter Pin, Cover (+spring washer) and Nut.
The Rotor should come right off.
Let me know if this helped, or if you any additional information, problems, or questions. Feel free to contact me at FixYa.com!

Jan 31, 2010 | 2003 Jeep Grand Cherokee

2 Answers

How to remove car roters from a 2001 chrysler lhs


take off wheels, remove caliper and pads, either slide off or remove cotter pin and big nut unscrew and then slide off

Oct 11, 2009 | 2003 GMC Sierra

1 Answer

How do you change the front rotors on a ford escort Zx2?


1) Remove tires
2) Remove 2 bolts that hold on the caliper (+ brake pads).
3) Remove hub grease cap (should just pop off)
4) Once the cap is removed, you'll see a large nut on the shaft with a pin through it. Remove pin and nut... the rotor will come off along with front bearing.

Jun 10, 2009 | 2001 Ford Escort ZX2

2 Answers

Toyota corolla


Remove wheel, brake cliper, cliper mounting bracket, brake pads and rotor.
Remove tie rod end and strut from spindle,
Remove large drive axle nut from center of hub by removing cotter pin and nut cover
Remove the ball joints 2 nuts and 1 bolt
Pull assy. lose from drive axle.
Take complete Hub assy with new bearing to an automotive machine shop and have them disassemble hub and replace bearing.
Reverse steps to reinstall

Jun 30, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
1992 Ford Explorer Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...