Question about 1995 Lincoln Town Car

1 Answer

Ac/heater blend door

AC compressor comes on and lines get cold. Interior mechanicals stay on heat. All digital controls show proper indications. I suspect that the blend door is not working. 1996 Town car. Is the door electrically or vacuum operated, where is it and how do I get to it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 6,826 Answers

Pull the dash my friend ,it sould have a motor

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heat and air conditioning temperature control does not work. Why doesn't ac blow cold air even though compressor runs and the refrigerant line gets cold? Only hot air comes from vents.


Probably the air blend door is not functioning properly. This can be caused by a vacuum leak; bad actuator; or bad vacuum check valve.

Aug 03, 2017 | AC Cars & Trucks

1 Answer

I have a 2005 Nissan murano the a/c compressor comes on and hot air comes out the vents. Please help


Your problem is most likely caused by a jammed AC/Heater temperature control blend door and or blend door electric actuator motor. The door is stuck in the heated air position and can't move to divert the air flow across the cold AC evaporator core. In most cars this problem requires the entire dash assembly be removed to replace the parts.

Jul 14, 2016 | 2005 Nissan Murano

1 Answer

Why does My thermostat Not switch between ac,heat,defrost . there's cold air coming out of vents but not cold enough to be ac. Initially when this started the ac was blowing hot air


If the air flow cannot be controlled from vent/defrost/floor you may have a blend door issue. This is an electric motor that operates a door in the heating system to control airflow. There are usually 3 motors controlling airflow direction,heat and recirculation. The Ac not blowing cold may also be another problem. If the AC is operational, the compressor will be engaged and the Ac low pressure line under the hood will bw cold. If this is all ok then a blend door issue should be suspected

May 09, 2015 | 2006 Jeep Grand Cherokee

1 Answer

2006 Grand Prix Heater blows cold air only


The blend door is probably what is keeping the air from blowing across the heater core and picking up the heat. I hope your manual gives a description and procedure for it.

The blend door actuator and other heater case doors will be either vacuum operated with a few canister diaphragms situated around the heater case, or they may be operated with electric motors. If you pull off the lower sound insulator panels below the dash, you can see the bottom of the heater case, and then find the actuator for the blend door. If vacuum operated, check for vacuum. The vacuum for the heater/AC controls comes from a single line from the engine, through the firewall, and into the back of the control head or to a control module. Then, many vacuum lines branch out from this central point to the canisters- the heater/AC controls will direct vacuum to appropriate actuators, or servos.

Nov 12, 2013 | 2006 Pontiac Grand Prix

1 Answer

The heater kicks on but only blows cold air


Air Temperature Control Blend Door Failure No Heat or no AC (dependes on where door sticks)

In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.

Other causes of no heat in the cabin are engine thermostats that are stuck open (engine runs cold) or air bubbles in the cooling system.

Jan 03, 2013 | Cars & Trucks

1 Answer

2005 jeep wrangler blows warm air not cold


Well this is different since most questions now are about no heat.
If one ac line is cold and the other is warm, I would suspect a blend door under the dash is not working. The blend doors direct air thru the heater core and the vents.

Dec 11, 2012 | 2003 Jeep Wrangler

1 Answer

Heater blows cold air


Air Temperature Control Blend Door Failure No Heat

In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.

Nov 01, 2012 | Pontiac Cars & Trucks

1 Answer

No heat only cold air comes out i have a 2006 torrent no heat


Hi there,

Well If you can turn on the heater but only cold air comes out you should check the blend door. It controls the door to switch from cold air to hot. It sits directly behind the heater/AC controls. It is white square plastic piece (approx 3in x 5in half inch thick and has a plastic screw rod that attaches to the heater/AC controls and they strip out

Good Luck!!

Thanks

Dec 29, 2009 | 2006 Pontiac Torrent

2 Answers

I have a 98 olds bravada. i have it on ac but hot


Does the AC come on and stay on? If so it will be either in the heater control head or a blend door or blend door motor!

Aug 13, 2009 | 1998 Oldsmobile Bravada

1 Answer

No heat - ac stays on blowing through defrost vents


If you have the heater directed to the windshield, the AC will turn on. Move the control away from defrost.

Feb 01, 2009 | 1998 Ford Windstar

Not finding what you are looking for?
1995 Lincoln Town Car Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...