Question about 1997 Ford Ranger SuperCab

1 Answer

Code 1443 - 1997 Ford Ranger SuperCab

Posted by on

  • 1 more comment 
  • fowler7j Jun 28, 2009

    i replaced the purge valve and the hoses from the canister going

    to the throttle body but i could not find a new valve i got one off

    another truck if i buy a new valve and it does not solve the problem what else can be the problem thanks

  • fowler7j Jun 28, 2009

    i replaced the purge valve and the hoses from the canister going

    to the throttle body but i could not find a new valve i got one off

    another truck if i buy a new valve and it does not solve the problem what else can be the problem thanks

  • fowler7j Jun 28, 2009

    i replaced the purge valve and the hoses from the canister going

    to the throttle body but i could not find a new valve i got one off

    another truck if i buy a new valve and it does not solve the problem what else can be the problem thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,984 Answers

P1443 Code:

Evaporative Purge Flow Sensor Fault

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 ford ranger won't start 2.3l has error codes 171,351,301 and 1443


171 is vac. leak usuealy. i belive the 301s missfire check all wires if you havent had the plugs changed id do that, also check your coil packs.1443 canaster purge cyloined. another thing that will cause your problem and is common is the crank shaft sensor goes bad cost about 23.00-28.00

Nov 19, 2013 | 1995 Ford Ranger Supercab

2 Answers

I have p1 auto codes p1506,p1443,p1744


the 1443 code is very common i just fixed it on my ranger. The canistger purge valve is defective, I found one at napa for about $46. It is located by the battery. After about 1/2 a day of driving or 4-5 starts that code will go away.

May 18, 2010 | 1997 Ford Ranger SuperCab

1 Answer

HAVE DTC 1443 CODE FAILED EMMISSION 1997 mercury TACER NO CK ENGINE LIGHT


See with FORD if they even have that light in that model

Oct 26, 2009 | 1996 Mercury Tracer

1 Answer

How to fix obd2 code 1443 on 96 ford ranger emisson test failed


It is usually carbon pieces from the evap carbon canister clogging the purge solenoid and purge flow sensor. There should still be a one piece purge solenoid and purge sensor with hose assembly available. You will also need to replace the carbon storage canister.
After replacement disconnect the negative battery cable, hold your foot on the brake pedal for 30 seconds, then reconnect the battery.

Oct 25, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Ford code 1443 problem


look for vacuum leaks in the system going from the purge valve all the way back to the fuel tank.

Jun 28, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Falt code p 1443


Canister purge solenoid. Replace the solenoid and purge flow sensor if it has one.

May 04, 2009 | 1996 Ford Mustang

1 Answer

1996 galant code 1443


Code is defined as:
EVAP Purge Control Solenoid '2' Circuit problem, the evap system control solenoid may have a fault or be inop. This could also in some cars be caused by a loose gas cap.

Oct 16, 2008 | 1996 Mitsubishi Galant

1 Answer

Code 1443 Mercury Cougar XR-7 4.6 Ltr engine (Check Engine Light is on)


it depends on which letter is in front of the code
B1443 is door handle switch circuit open
C1443 steering phase Acircui short to ground
P1443 evaporative emission system control valve ( low / no flow )
hope this is what you ar looking for

Oct 10, 2008 | 1996 Mercury Cougar XR7

1 Answer

Mitsubishi galant 1996 4 cil.


front right under the hood next to the battery the computer humms when trying to start it.

Sep 15, 2008 | 1996 Mitsubishi Galant

Not finding what you are looking for?
1997 Ford Ranger SuperCab Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...