Question about 2002 GMC Yukon XL

1 Answer

Electronic buttons on steering wheel and rear view

Electronic buttons on steering wheel (03 gmc yukon) and rear view mirror are extremely hot sporadically.

Also after I had ac belt replaced there is a flapping noice when I first drive the beast. The shop then replaced my drivet and the flapping is constant along with a sqeal now

Help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 22,133 Answers

Take it back to the garage and ask them to have another look ,because some so called mechanic could have mounted the belt under one of the jockey idler wheel instead of over it ,so the grooves are running over the flat pulley instead of the flat of the back of the belt

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light on 2003 yukon rear view mirror is on


That is listed in the owners manual, if you don't have one you can download for free here.

Aug 27, 2012 | 2003 GMC Yukon XL

1 Answer

How to replace the electronic interior rear view mirrow on 2004 Envoy SLT. I have a new one to install and need to figure out how to remove the old one on the truck...


Hello lindleyjl,

1. You will need to disconnect the wire cove from the upper mirror base. (See image below)
2. Use a flat blade screw driver to disconnect the electrical connector from the mirror. Number 1 in the image.
3. Use a torx driver to loosen the set screw that holds the mirror base to the windshield button.

netvan_124.png
4. Slide the mirror upward off the the rear view mirror button; number 1 in the image below.


netvan_125.png
To install, reverse the above outlined procedure.

I hope this helps.

Regards,

netvan

Jul 24, 2011 | 2004 GMC Envoy

1 Answer

How do I use the 4 wheel drive on my GMC Yukon 2004. What dash button turns the 4 wheel drive on?


Hi, depending on the vehicle, there can be different controls. Standard control, 4hi, use in slippery conditions, never on dry pavement. Just push the button, and it will engage. 4low is for extreme conditons and the transmission must be in neuteral to engage 4lo. If you have auto 4wd button, just press the button in slippery conditions. If you have a denali, it is all wheel drive, and there are no buttons to push. So, depending on the model, there are multiple ways, but pushing the button engages it. Good luck...Goop

Dec 12, 2010 | 2001 GMC Yukon XL

2 Answers

2003 GMC Yukon Denali My passenger side windows, locks, and mirror are not working...I am sure its a fuse but is unsure of the fuse location.


How to fix the steering wheel options on my steering wheel, for instance the volume for radio, onstar, etc? I have a '03 gmc Yukon denali xl

Jul 15, 2010 | 2003 GMC Yukon XL

1 Answer

Rear wheel bearing is out, how easy to repair


not easy,you will probably need a hydraulic press to remove and reset the bearings

Apr 20, 2010 | 2002 GMC Yukon Denali

1 Answer

03 yukon driver side mirror, rearview going day to night any time


you either have a loose connection to or a failing daylight sensor, get it replaced

Feb 25, 2010 | 2003 GMC Yukon XL

1 Answer

Replacing the light on the steering wheel buttons?


The switch has to be replaced, the bulbs are not serviced seperately. On some of the vehicles, you could pull the the switch out far enough to access the connector and change it from the front, but be careful, if there is not enough slack in the harness, the steering wheel has to come off, along with the rear cover on the wheel, to get enough slack in the harness to remove the switches. This was a design change around 2004 or 2005.

Sep 22, 2009 | 2004 GMC Yukon

1 Answer

Rear view mirrors on my GMC Yukon not folding in


how do i fix the ball joints in the front end of a ford 94 aorstar

Aug 18, 2009 | 2003 GMC Yukon XL

Not finding what you are looking for?
2002 GMC Yukon XL Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...