Question about 1990 Jeep Wrangler

2 Answers

1990 jeep wrangler rear end "bang" noise then jeep would move,

Put in 4 wheel drive to get home what could the bang noise be?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I had the same thing happen. Your rear drive shaft u-jount is bad. Also wnat to check the level of gear oil...

Replacing the u-joint takes about an hour to do... not a tough job.

Posted on Sep 30, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 28 Answers

Could be several things. Does the rear drive shaft have any play in it? If so, could be that the spider gears, ring gear, or pinion gear or bearing have disintegrated. If it was the pinion or ring, it will cost several hundred dollars for the new ring gear and setup. It is not a part you will be able to install yourself.

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 wrangler wont drive forward in 2wd. just makes a loud grinding noise but will drive in reverse


sounds like rear end is coming apart
google wrangler forums and post there

Feb 03, 2013 | 1997 Jeep Wrangler

1 Answer

Noise from rear-end on jeep chrokee


Did you check the fluid level in the rear end?

Jun 27, 2017 | 1998 Jeep Grand Cherokee

1 Answer

Noise from rear-end on jeep chrokee


Hey Dennis,
Have you checked the lube level in the read differential? If its good, you have a wheel bearing going bad. To replace it, you will need to remove the axle.. This is not a hard fix, but you have to have the ALL the tools and you MUST put the rear end up on jack stands..DO NOT use a jack to hold the rear end up.. IF you are not very mechanically inclined, please take this to a qualified professional..
Auto Truck Repair Manuals by Chilton Haynes Clymer Factory
Jeep Cherokee 1984 2001 Repair Manuals
http://repair.chiltondiy.com/Pub/DIY/Product/1998-Jeep-Cherokee-repair-manual-online?ca=Repair&b=2229

Jun 27, 2017 | 1998 Jeep Grand Cherokee

1 Answer

1990 jeep


Are you in neutral? Are you rolling slowly?

Apr 22, 2010 | 1990 Jeep Wrangler

1 Answer

Caster adjustment for 1990 jeep yj wrangler


caster is adjusted at the rear of the lower control arms. Camber is fixed and cannot be adjusted by normal means (though special off-set ball joints are available to do that) Toe in is adjusted by turning the sleeves in or out on the tie rod ends. None of this should be done at home though crude adjustments can be made in order to get the front end reasonably straight. Adjustments are made on an alignment machine that allows precise adjustments to all you mentioned as well as front/rear tracking.

Mar 12, 2010 | 1990 Jeep Wrangler

1 Answer

1991 Jeep wrangler 2.5 standard shift.vacumn lines from transfur case to front drive axle.we need a picture of where each vacumn hose goes. a print out of the colors. thank you


i just boought a 1992 Jeep Wrangelr sport with a chevy 305 V8 and its a automatic with a standard 4 wheel drive and i put in 4 wheel drive and the front tires wont move what is wrong????

Mar 11, 2010 | 1990 Jeep Wrangler

1 Answer

1991 wrangler 4x drive


its the automatic locking hub mecanizm replace with after market manual hubs and that should be the end of that

Dec 27, 2008 | 1991 Jeep Wrangler

1 Answer

2003 jeep wrangler transmission problem


look under vehicle and make sure drive shaft going to back of truck is still there and connected. if it is there is a problem w/transfercase.

Nov 09, 2008 | 2003 Jeep Wrangler

Not finding what you are looking for?
1990 Jeep Wrangler Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...