Question about 2002 Hyundai Accent

2 Answers

No voltage to fuel injectors and fuel pump relay checked fuses in both fuse boxes

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Check for a fusable link. A fuseable link is a wire that blows just like a fuse when overlaoded or tripped. Im not sure where thay are on your vehicle but they commonly are beside the fuse box under the hood or along the back of the fire wall. You have to cut the plastic housuing around them to expose them. I would either pick up a chilton repair book or call the parts dealer to find the exact location.

Joe

Posted on Jun 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 22,156 Answers

Factory immobiliser ,try spare key ,if not dealer only

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 pt cruiser keeps blowing fuel pump fuse,replaced fuel pump, no change.runs rough at idle and stalls,blows fp fuse,also replaced ign.coil,plug wires and plugs also changed relays


There are two fuses for the fuel pump relay. One fuse is load side of relay, that fuse also sends voltage to load side of asd relay, the asd relay sends voltage to several systems, two of which are the fuel injectors and ignition coil. I'm not telling you to replace, anything, but, you need to do some testing.
The other fuse goes to control side of relay, smaller amp fuse. I don't know the amp rating of the fuse that keeps blowing.
See that fuse, it supplies voltage to load side of fuel pump relay and also to asd relay.
26322929-c15bjyrfwzlf33vqjpu1ik1c-2-0.jpg

Oct 22, 2016 | 2004 Chrysler PT Cruiser

2 Answers

88 chevy 350 with no fuel pump and no injector pulse


The fuel pump circuit and injector circuits are fed by two different fuses.
The fuel pump relay and injectors are controlled by the computer. Have you checked both ECM fuses for power ?

Apr 10, 2013 | 1988 Chevrolet K1500

2 Answers

I am not getting gas or spark


The fuel pump and coil are on two different circuits.
The fuel pump is on the 20amp ECM fuse and the coil, ignition module, and injectors are on a 20amp fuse #10. But the ECM fuse could keep the coil and injectors from working.
You would need to test the fuses in the box in the engine compartment, and the fuel pump relay and coil for voltage and ground. The pump relay is grounded by the computer for 3 seconds when the engine is cranked.

Sep 16, 2012 | 1996 Chevrolet Blazer

1 Answer

No voltage to electric fuel pump relay?


voltage comes from fuse box, should have a fuel pump fuse, check for blown fuse, if not try jumping a fused wire from 12 volts to relay and see if fuel pump runs, hope this helps ?

Sep 03, 2012 | 2002 Kia Sportage

1 Answer

98 contour repair manual


You don't need a repair manual if you know the basic's of automotive repair . You just need wiring diagrams an fuse box layouts . You can find those here free http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model ,engine ! Under system click on electrical distribution .Then under subsystem click on fuse panel . Click the search button then the first blue link . This shows relay positions in the under hood fuse box. The PCM power relay supply's B+ voltage to the fuel pump relay , PCM - engine computer ,mass air flow sensor an someother thing's .

Jul 18, 2017 | 1998 Ford Contour

1 Answer

Asd relay not operating


The ASD is what powers the fuel pump relay you need to check the engine fuse box junction for open fuse especially the fuel pump fuse and the ignition fuse. Get the ASD power corrected and the fuel pump injectors coil and reference will be back in action,check the fuse especially fuse No.23

Mar 26, 2012 | 2002 Jeep Wrangler

1 Answer

Change the engine in a 2001 chrysler sebring convertible. now has no spark to the coils. no voltage at the coil and injector fuse. can some one help


Trouble shoot the ASD relay first. It is responsible for the fuel pump relay and ignition power to the coil.When you turn the key on the ASD should collapse and supply voltage to 02 heater circuit and power to the injector the ECM supplies the ground circuit.In the engine fuse junction box make sure no fuses went open especially the fuel pump fuse let me know what you find I will check for response and will follow upcansmo_159.gifcansmo_160.gif

Aug 29, 2011 | 2001 Chrysler Sebring

4 Answers

No voltage to the fuel pump. Vehicle stalled and would not start, no fuel pressure and could not here the pump when I turned the key on. Removed pump, checked and the pump is OK. Checked and had no...


Here is a picture of where the relay is. this is at the right fender area. Also, the fuse pump relay gets its main power from an orange fuse link, which is located at the starter relay....there is no "fuse" for the fuel pump...just fuse links. I would check the condition of all the fuse links at the starter relay. Replace any burned links with fusible link wire ONLY . You will also need to find out what caused the link to burn if this is the problem. Please also review this article: Where's The Fuse?


dttech_33.gif

Mar 05, 2011 | 1989 Jeep Cherokee

1 Answer

Hello,I am trying to trouble shoot a fuel delivery problem in a 1998 Subaru Forester.Can I use a multi meter to check the electronic leed to the injector from the computer to see if the computer is sending...


Check fuel pump fuse in inside fuse box Check fuel pump relay The pcm sends signal to the injectors I dont know the voltage I when thought the whole book

Feb 28, 2011 | 1998 Subaru Forester

1 Answer

Shorted out one of the fuel injector wires,and now my fuel pump isn't working,checked the fuses,none are blown,any ideas,other fuses or fuse link?thanks,


The fuel injectors receive their power from the Powertrain Control Module (PCM) Power Relay which is located in the Engine Compartment Fuse Box. This circuit is protected by Fuse "I" (20 Amp), also located in the Engine Compartment Fuse Box. If you blew a fuse, this would be the one.
The fuel pump, however, is a totally different circuit. (although it is controlled by the PCM which will not work if the fuse above is blown) The fuel pump gets its power from the fuel pump relay which is protected by Fuse "O" (20 Amp) in the Engine Compartment Relay Box.

Jan 30, 2011 | 1994 Ford Bronco

Not finding what you are looking for?
2002 Hyundai Accent Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...