Question about 2007 Honda CR-V
Can somebody have an schematic or diagram on how removing the rear door interior panel of an Honda CRV 2008? I'm on the task of installing an aftermarket rear view camera but it looks its not an easy task. Please advice. Thnaks!
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you must carefully pop off the door plastic clips using a screwdriver and prying gently until they pop out , also remove the screws under any small round plastic screw cover inserts and in the plastic door handle area
Posted on Sep 19, 2009
SOURCE: How to remove tailgate cover
most car all makes these days use push clips on the hidden panel side or visible screws or smaal cicular covers hidding the screw heads or a combination of clip and screw.pull the panel towards you inspect it has a lip at the window glass then push to the sky,
Posted on Nov 06, 2008
At most auto parts stores, they carry what is called "Rearview mirror adhesive" - It costs about $4 or $5, and comes is a little "blister" package. It is a special two-part adhesive (utilizing a pre-cleaner and a "gluing" agent) that is REQUIRED for installing these mirrors on glass - Super glue will not work for this,... All you will do with superglue is make a mess... - The adhesive isn't terribly hard to use, but it does require a bit of patience, and I'd recommend following the instructions to a "T" for the best results (Temperature, time, etc..). Hope that helps some...
Posted on Sep 12, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle
Posted on Nov 05, 2009
There are three ways usually...
You'll need to remove a screw securing the base onto the mount (usually on metal bases)
You'll need to lift up a clip on the bottom of the base and then slide the base off the mount (usually on plastic rectangular bases
You'll need to twist the base about 45 - 90 degrees so that it slips off of the mount (usually on bases that are circular)
Posted on Nov 12, 2009
Testimonial: "Excellent response and timely! I am attempting to find the right "tool" to pry up the internal clip...a flatblade screwdriver doesn't seem to do it."
Tips for a great answer:
Sep 09, 2016 | 2013 Honda CR-V
Jun 18, 2016 | Honda HRV Cars & Trucks
Mar 03, 2015 | Honda CRV Cars & Trucks
Feb 07, 2014 | 2003 Pontiac Grand Am
May 16, 2013 | Cars & Trucks
Oct 31, 2012 | Cars & Trucks
May 07, 2009 | 1994 Mercury Cougar
Feb 21, 2009 | 1996 Ford Thunderbird LX
243 people viewed this question
Usually answered in minutes!