Question about 2003 Dodge Durango

1 Answer

I have dodge durango 2003,my brake lights doesn't work, i all ready change all bulbs, fuses, and swicht and the back light doesnt work, just only work the brake light on the top of the rear gate.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Do you have a hitch on this vehicle? If so, check to make sure the line didn't come unplugged from the wiring running back the hitch wiring. You may ahve to drop the spare tire down to do this.

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 durango brake light not working


If only one brake light is out (mine was driver's side) and you've tried changing the bulb, then it might be a metal contact in the bulb socket in the light assembly. Looks like the hot bulb melts the plastic and lets the one or more bulb contacts sink into the socket and pull away from the base of the bulb, preventing electrical contact. A little coating of solder on the socket contact(s) gave enough height to contact the base of the new bulb and get the brake light working again.

Feb 10, 2013 | 2003 Dodge Durango

1 Answer

Brake lights on my 1999 dodge Durango won't come on. I have all ready change all the fuses, the brake switch and even all the light bulbs and they still won't come on


Hi, is there power getting to your brake switch? I have pasted the diagram below. If there is power to the brake switch, the problem is the wiring. If no power to the brake switch, it may be the fuse or the wire from the fuse to the switch.

jturcotte_2414.gif

Oct 17, 2011 | 1999 Dodge Durango

1 Answer

I recently replaced the front rotors, brake pads and master cylinder in my 2003 Durango. I've since discovered that the brake lights are not working, including the 3rd brake light in the tailgate. I...


Hello, Well there is not much more it could be unless you have a shorted wire or a burned fuse. I would normally think that the turn signal canceler was bad but the 3rd brake light will still work if that is bad so I would check all fuses and for bare or shorted wires.

Jan 18, 2011 | 2003 Dodge Durango

1 Answer

I have a 2000 Dodge Durango I bought about 4 hours ago. The tail lights do not work but the brake light and turn signals do. Also the dash lights do not work. The dash lights came on when I hit the...


The odds are the one fuse is blown for the dash and the tail lights. And the wrong bulb may have been put in for the brake light. The brake light is feeding back into the tail light circuit causing the fuse to blown out.

Change out the bulbs with OEM bulbs and replace the blown fuse. That should fix the problem.

Apr 16, 2010 | 2000 Dodge Durango

2 Answers

'03 Durango right brake light out


There is a circuit board in that light that is most likely the problem.

Apr 08, 2010 | 2003 Dodge Durango

2 Answers

3rd. left brake light is out replaced it and still doesn't work


You may need a signal light switch.
If your brake and signal use the same bulb,the brake light power is directed through the signal light switch.
Dodge has had problems in this switch with this exact problem.

Oct 14, 2009 | 2002 Dodge Durango

1 Answer

Brake lights out; bulb, fuse okay


Sounds like you need to replace your brake light switch.  It is located on your brake pedal and you should be able to pick it up for around $20-$30 at your local parts store.

May 19, 2009 | 2003 Dodge Durango

1 Answer

2003 durango brake lights stopped working


Something is being missed,start with checking the fuse for the brake lights. Then check the brake light switch for power in and out(when depressed).Your ground is intact so no power. If still nothing, remove the lamp in question and test the contacts. good luck. Don't forget to depress brake pedal while probing contacts.

Apr 26, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
2003 Dodge Durango Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...