Question about 2000 GMC Sierra

1 Answer

I need to know if I need any special tools to remove and replace the ac pump on a 2000 gmc Z71 sierra with a 5.4 ltr motor. Also it would help to know the best way to get it out. It appears to look like the way to go would be to remove the passenger side front tire and inner fender well and approch it from the lower side rather than comming down from the top. ????????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 6,826 Answers

I dont think so but u have the right idea about removing it from truck go boy go

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove fuel pump for 1998 GMC Sierra


Here are 2 links to see how to change,so here is the first one.Here's the second one.You will need to relieve the fuel pressure first,click here to see how.Ask Autozone to borrow that special tool,they have a tool-loaner program.

Jan 18, 2013 | 1998 GMC Sierra

1 Answer

1997 GMC Sierra Z71 Xcab 5.7


Try motor to body ground ? wiring harness connections..

Aug 17, 2012 | Cars & Trucks

1 Answer

I,ve got 99 gmc how do you remove ac clutch


You need a special tool to get it off, the tool comes with instructions, you can buy the tool kit here (one of many sources)

Jul 24, 2012 | 1999 GMC Sierra

1 Answer

When I open the door on my 2000 GMC sierra z71 it sqeaks and drops down can I fixed that myself


Sounds like door bushings.Most of the hinges are welded on but you can replace the bushings.You might need a special tool.If you don`t feel comfortable doing it yourself then go to a body shop and have them give you a free estimate.Some of these are no to easy.Hope this helps.Good luck.

Sep 17, 2010 | 2000 GMC Sierra

1 Answer

I have a 2000 GMC Sierra extended cab Z71 and my fuel gauge fluctuates.It takes it a while to register it has fuel and then it will just drop to empty then bounce back up. I was wondering what could cause...


The fuel sender is built on to the fuel pump. This happens sometimes if you run the tank low alot Try keeping the truck above 1/2 tank see if this helps otherwise you might need a new fuel pump

Dec 27, 2009 | 2000 GMC New Sierra 1500

1 Answer

My 2000 gmc just shut off while driving


check fuel pump relay, is fuel present at motor 

Sep 15, 2009 | 2000 GMC New Sierra 1500

1 Answer

Key Cylinder needs replacing


you must remove the air bag,steering wheel, directional switch and lock plate. There is a screw which locks in the lock cylinder but unfortanetley it is not easily accessable and there is a special tool needed to remove the lock plate snap ring

May 26, 2009 | 1998 GMC Sierra

1 Answer

Will 15 inch wheels fit a 1999 gmc sierra z71?


you have too get special rims made too clear the calipers

Mar 13, 2009 | 1999 GMC Sierra

1 Answer

Fuel pump


Ok-You will have to Drop the Fuel Tank. The Pump is Inside the Fuel tank and is NOT an Easy job. If you decide to Proceed-Let me know!

Jan 08, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

1997 gmc sierra p/u 5.0l 2wd needs fuel pump


NO dont drop tank, you will be sorry, take bed off, only like 6 or 8 bolts, and you will have more room to work, and its a pain in the *** to undo the lines and drop the tank, you cant get in there to do it, but just basic tools nothing special, be sure and try not to make any sparks while takein off that ring to get the pump out, and put an ac delco pump on there

Oct 30, 2008 | 1997 GMC Sierra

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...