Question about 1999 Chevrolet Tahoe

2 Answers

Getting driverside door panel off - 1999 Chevrolet Tahoe

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chevrolet Master
  • 75,822 Answers

Remove the trim piece around the door handle. there are 4 tabs, one at 12 o'clock, 3 o'clock 6 o'clock and 9 o'clock. remove the 2 screws in the indention for closing the door. carefully remove all of the locking pins in the door. there is a special tool for this but if you are careful and take your time 2 screwdrivers will also work. Start in the lower left corner and slowly pry the panel away. you will be able to see the pins as you are pulling away. slide the screwdrivers on either side of the pin and carefully pry open. once all pins are released the small trim piece by the mirror needs to be removed in the same way. there is one pin only. after the trim piece is removed lift the panel up to release it from the window channel

Posted on Jun 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Pry off control mechanish with screw driver, pry off small panel next to door handle, pry off two small plastic caps from door assit closer, remove screws at bottom should be approximately five 6 at the smost, Lift door panel up and pull away from car, Turn control unit up, remove screws and pry off with screw driver.

Posted on Jun 28, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

99 mercury mountaineer door opens but won't lock on driverside all other doors lock. What can be wrong?

Lock accuator motor about $40 at Oreillys.. Easy to replace after you get the door panel off.

Mar 07, 2014 | Cars & Trucks

1 Answer

Control panel

Test the control pamel for power in, it is an orange wire.

Apr 30, 2012 | Cars & Trucks

1 Answer

Door lock and opwer windows panel does not work

check your wires between the door panel and the cab. ive had this happen 2 or 3 times. you probaly have a broken wire. all power is run through the driverside door panel. the back windows worked and so did the locks on all other doors.

Feb 07, 2012 | 2004 Jeep Grand Cherokee

1 Answer

Power windows not working

check for blown fuses?you've most likely done that. open hood and look on the driverside fenderwell for a black main fuse and relay center or box, open the box and look under the lid for locations of relays and fuseslocation the fuse for electric widow and as you look at the fuse,you will see a horseshoe type metal ring inside the plastic 'window' if it's broken(the hORSESHOE} the fuse is bad and needs a new one.there is also a fuse panel located on the driverside of dash,open the door and you should see a removeable plastic cover on the drivers door at dash panel just to the left where the door closes. remove that cover to expose the fuse panel to inspect for blown fuses. thank you for choosing

Apr 08, 2011 | 1994 Buick Century

2 Answers

What tires do I get for Suzuki grand vitara 2002

Look inside you driverside door panel. On the frame towards the back should be listed.

Jan 05, 2011 | Suzuki Grand Vitara Cars & Trucks

2 Answers

I have no dashlights and fuse is not in the fusebox under the hood so where is the other fuse box?

The other fuse box will be inside cabin, driverside, and either behind a panel about knee height to your left as your sitting in driver seat, or when you open your door and you can see the side of your dash that area could be a ncover for your fuse panel. That is also the drivers side. The panel may be conceled but it is there in 1 of those two places.

Nov 23, 2010 | 2001 Dodge Grand Caravan

1 Answer

How do I remove driverside inside door panel ?

door panel is holding by dozen plastic push pins.
strat from the button. use a screw driver or putty knife. pull the panel towards you. be careful not to damage the push pins. go around the panel toward the door hinger then the otheer direction toward the lock.once you have panel seperated from the door. push up the panel to clear the glass. (it is easier if the window is all the way down). pull back the plastic (don't destory it). you need to put that back later. now can get access to the galss and what ever else you are looking for.

Apr 02, 2009 | 2002 Dodge Caravan

1 Answer

How to remove the driverside door panel 2001 325i

with a screw driver remove the mirror control, that comes off its another screw there i had the same problem

Nov 17, 2008 | 2001 BMW 325

1 Answer

2001 malibu rear driverside window off track

Just take a phillips screw driver, and a good sturdy putty knife, and your fingers, and just pry the plastic away from the metal of the door...

Open the door first, and where the inside door handle there should be 1 or 2 screws, and one near where the handle is to open the door from the inside. Take these out first before attempting to pry off the door panel. The panel is held onto the door by plastic snaps shaped like an enlongagted tooth.


Don't be surprised if you have to get a whole new window motor assembly, alot of times they come as one assembly and seperate parts do not exist. Good Luck!!

Aug 23, 2008 | 2001 Chevrolet Malibu

Not finding what you are looking for?
1999 Chevrolet Tahoe Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides