Question about 2001 Nissan Pathfinder

1 Answer

I replaced my ac belt because the other one broke. The belt is on correctly and pulleys are all functioning but now the AC doesn't kick on. It's 97 today. HELP!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Check the tension of the belt around the a/c clutch. The clutches can be overtightened but of course not to loose either. They also have tendency to wear out. Did the A/C work before you changed the belt? If it did, it would probably have to do with the clutch.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt on '97 3.8 Mustang pops off idler pulley even though everything appears to be properly aligned after A/C compressor replacement.


If the idler and nearby pulleys are all in-line, not excessively worn and the axis is exactly at a right-angle to the belt run the belt should not pop off, therefore either the idler or other pulleys are worn tapered or sagging or it is possible the belt has become stretched on one edge.

You could try turning the belt around so it is traveling in the opposite direction and see if it makes any difference. Some idler pulleys will also turn round if required.

I hope this provides food for thought.

Feb 26, 2015 | Cars & Trucks

1 Answer

Dodge stratus


If you have a separate belt driving the ac compressor then leave the belt of. IF it has to go around the ac pulley then disconnect the power lead at the pulley clutch and again no problems as the ac pullet becomes an idler.

Aug 25, 2013 | Cars & Trucks

2 Answers

2000 cavalier ac doesn't work, do i need a bypass pulley or can i disconnect the ac clutch


your best bet is to replace the a/c with a bypass pulley ,and a good cheap place to find one is the local junk yard

Dec 26, 2012 | 2000 Chevrolet Cavalier

1 Answer

I've got 97 astro van that has been making a high


very posible its the ac compressor and yes it has to be replaced complete take belts off turn pulleys one at time and check for play at pulleys if any noise coming out of ethere one thats the problem ok

Dec 02, 2012 | Cars & Trucks

2 Answers

My ac froze up and broke my belt is it a way to bypass the ac


yes, you have to get a delete pully and remove the a/c compresser and install the delete pully

Jul 15, 2012 | 2004 Ford Expedition

1 Answer

Ac pulley


The pulley can be replaced you can't get another belt, they do not make one. Even cars without AC have the same belt, in the place of the AC compressor is a "AC Delete" pulley.

Jun 12, 2012 | 2000 Dodge Caravan

1 Answer

Can you take a 97 f150 with ac and bypass the ac pully with a belt for a no ac engine


i purchased the AC delete belt...do i have to remove anything to properly install? or do i just take off old bet and put on short belt and crank tensioner the correct way? it seems that the ac compressor pulley is in the way?

Mar 14, 2012 | Ford F-150 Cars & Trucks

1 Answer

My 97 blazer squealing has been driving us crazy with a


Could it be the pulley on the AC that's squealing? Use a mechanic's stethoscope to locate the squeal. If it is the AC, you can get a belt that is shorter, and bypass the pump, since it doesn't work anyway. Try some belt dressing first. When the engine is running, just spray it on the inside of the belt.

Jan 24, 2010 | Chevrolet Blazer Cars & Trucks

2 Answers

A/c mount broke off the actual compressor, no way to attach to engine mount, has a serpentine belt , can i get a belt shorter that will bypass the ac.


You can buy an A/C bypass pulley from an O'reilly auto or anyone that supplies Dorman parts. the pulleys are cheap and allow you to mount things and use the stock serp belt. You will have no AC ,though. The kit is designed with the intent of eliminaing the compressor, which is very expensive to replace.

Aug 17, 2008 | 2000 Chevrolet Cavalier

Not finding what you are looking for?
2001 Nissan Pathfinder Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...