Question about 2005 Ford F 350 Super Duty

1 Answer

Fuel system l changed the both filters and l bleed it to the filter on the block....but it is still having problems starting...it wants to start but there is still air somewhere.Can you help me out????Thanks.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Check all lines and fittings for leaks,prime and bleed system

Posted on Jun 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to bleed the fuel system in the 2009 Mondeo after changing the fuel filter on a diesel


You don't. You just crank the engine until it starts. Modern vehicles work on a pressurised system with a return back to the tank. The fuel is pumped from the tank to the injectors and excess fuel is returned to the tank.

May 12, 2016 | Cars & Trucks

1 Answer

LINCOLN MACHINE WILL NOT START IT IS DIESEL GOT NEW FILTER


Did you prime the filter , dispels always need primed when changing fuel filters , this means to fill the filter and put it back on could be air bound bleed the fuel system too

Jan 21, 2015 | Lincoln Cars & Trucks

1 Answer

Just changed the fuel filter on my navara D40 dual cab started it, ran for 5 seconds and won't start again. Have pumped the top on the filter for ages. HELP


check if there is bleed screw on the pump and if so bleed there while pumping the filter pump. Next loosen off the injector line nuts and crank over until you see fuel droplets at the nuts . keep cranking as you tighten up the nuts and it should go. Diesels not starting after filter changes ( or running out of fuel) is a result of air in the system / pump/ injectors.

Apr 20, 2014 | Nissan King Cab Cars & Trucks

1 Answer

Changed the fuel filter on my d4d fortuner and now have aie in fuel sysytem. wont start . howdo i bleed it?


Something else is the problem because it is impossible to get air in the fuel system and have it not start. Look to see what you might have knocked off or broke while changing the filter.

Dec 30, 2013 | Toyota Pickup Cars & Trucks

2 Answers

My 5.9 dodge cummins diesel won't start, I've replaced the fuel lift pump, and the fuel filter, turns over. But will not start?


Most likely you just have air in the lines.Crack them open one at a time and bleed them with the fuel pump off and on till you get fuel.If it fires dont hit the throttle let it sit and idle and close the line.Does it fire up with a small whif of starting fluid?

Mar 17, 2013 | 1999 Dodge Ram

1 Answer

Water in fuel light comes on, engine won't start, profuse white smoke on cranking. Trying to find fuel filter/separator, but unable to.


If this an e 350 between 93 and 2003, the fuel filter is located on top of engine front. You will have to take air filter box off to get to it, the fuel filter housing has a lever on the side to drain water. Always a good idea to use fuel conditioner, especially in the winter. Will help disperse the moisture in the fuel. Remember after changing the fuel filter, you will have to bleed the fuel system. bleed it by cranking engine until it starts, if the vehicle has a mechanicle fuel pump ( 98 or earlier) later modles have an electric pump. System may be primed by cycling the electric fuel pump 2 or 3 times. Please me feedback if this helps. This is is the only way we know if we helped you with a problem

Feb 14, 2010 | Ford E-350 Super Duty Cars & Trucks

1 Answer

After replacing fuel pump and filt truck wont start with started fuid


If this is a diesel you should not use starter fluid unless the glow plugs and glow plug controller is removed. If this is a diesel you most likely have air in the fuel system.When changing fuel filter on a diesel fill the filter container with clean diesel,screw the top of the fuel filter canister on open the bleed screw and turn the engine over until only clear fuel (no air bubbles)is bled from fuel system. Then you may have to turn loose the connector on the innjectors to bleed more air out of the fuel system.

Jun 15, 2009 | 1994 Chevrolet K1500

1 Answer

Bleeding fuel filter on a 97 hyundai


go ahead and change the filter. There is no need to bleed it after changing the filter. Just start up the vehicle and let it run for a minute or two.

Feb 09, 2009 | 1997 Hyundai Accent

2 Answers

Fuel filter on a 6.2 diesel


You need to install an electric fuel pump to lift the fuel from the tank to the mechanical pump. You can turn off the electric pump after starting or use it when bleeding the lines after changing the fuel filter. You can start the truck after a few minutes instead of a few days. I know from experience and fought that problem for years.

Dennis.

Oct 26, 2008 | GMC C2500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...