Question about 2002 Jaguar X-Type

1 Answer

Cruise control say not working and a symbol of the engine is on it changes gears and everythng fine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You probably have a vacuum leak. First: Check the brake vacuum line from the air intake manifold to the brake servo (black plastic pipe running from top of engine to brake servo with flange in the middle). It may be cracked. When engine at idle listen for leaks. You can run your hand along it to try to feel sucking.
Second:
If not that lift the black platic engine cover (3 screws) and look for cracks/leaks in the 1" black house running from front cyclinder bank to air intake manifold. It may be split/sucking air.

You may need to reset the Check engine light. Good luck

Posted on Jul 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Subaru legacy wagon will not shift up from first gear. it is an AT.


run the fault but all you describe is operated from the VSS sensor ( vehicle speed sensor)
it tells the cruise control the vehicle speed , tells the TCM the vehicle speed so that ratios can be changed, activates the speedo,and will report with a check engine light to report a transmission problem
run the fault codes first

Mar 05, 2017 | Subaru Cars & Trucks

5 Answers

How come my cruise control won't even light up, much less work? 2004 trailblazer


has a fuse and an actuator motor or
the set resume switch could be faulty

May 31, 2016 | 2004 Chevrolet TrailBlazer

1 Answer

Cruise control notworking on a 2002 F150


cruise controls are controlled by the following switches and sensors
1 the switch itself
2-- the clutch pedal sensor or the VSS in the auto transmission
3 the brake sensor ---4-- the gear change switch or selector
5-- the engine speed sensor ( tacho)
6-- the road speed (VSS )
if 1 or a combination is not working or is outside parameters , the cruise control will not switch on
the road speed in a manual is set at around 20 mph and any less will not engage cruise control(CC)
changing gears in a manual will disengage CC
touching the clutch pedal will not allow engagement or will disengage CC
for some sensors run the fault codes

Nov 05, 2015 | 2002 Ford F150 Regular Cab

1 Answer

'06 Frontier XE manual trans.Cruise control will not stay engaged when in 5th gear.


Changing the ratio could be causing the computer to miscalculate the speed. Try ruling out the sensors (by seeing if it stays engaged while in fourth gear.)

May 07, 2014 | 2006 Nissan Frontier King

1 Answer

Speedometer, odometer and cruise control not working in '97 Taurus Duratec


computer probly needs to be flashed or reprogrammd to sync w new motor---some independent shops have the factory gear to do this-dealers only go back like 5yrs

Nov 17, 2013 | 1997 Ford Taurus

2 Answers

2001 Lincoln LS, 5 speed manual, cruise control buttons are mixed up. + does resume, - sets or increases speed, cancel sets or reduces speed and won't cancel. Is this computer related? Had an issue...


Sounds like your clock spring may be going bad. The blinking cruise control symbol is a warning that you are traveling at a high speed. That is nothing to really worry about.

Sep 04, 2017 | Lincoln LS Cars & Trucks

1 Answer

Car jerks when starting from a stop. Engine symbol shows on dashboard and states "CRUISE NOT AVAILABLE" when none of the cruise control buttons were not pushed. Car drives fine after getting started but...


you need to have your obd3 Diagnostic Trouble Codes read Most auto parts stores will do this for you. This will give you a better idea where to start.

Aug 19, 2010 | 2003 Jaguar X-Type

1 Answer

How does the speed control work on the 1998 jaguar xj8


ther are 2 buttons below the gear shift towards the rear of the car - one has what looks like a spedometer symbol on it - press tthe symbol and it activates the cruise control - then use the set button of the steering wheel to set the speed you want

Sep 05, 2009 | 1998 Jaguar XJ8L

3 Answers

Cruise Control Not Working, Fuse OK, where do I go next?


my 1997 honda accord cruise control fuse blow and the car start up but will not go in gear. I change the cruise control fuse the car goes in gear then the fuse blow again. WHAT IS THE MY CAR PROBLEM.

Oct 01, 2008 | 1997 Honda Accord

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Mark Glawdecki

Level 2 Expert

82 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...