Question about 2003 Buick Century

2 Answers

I need to reset my oil change.

Where is the ''Change oil soon'' reset button?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Turn on the key and within 5 seconds press the gas pedall 3 times to the floor and then watch the change oil soon light blink a few times and it is reset for another term of driving.

Posted on Jun 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Try turning the key to the run position and pushing the gas pedal 3 times all the way to the floor.

Posted on Jun 28, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: reset change oil soon light 2001 saturn L-200

Under the hood, next to the battery, is a fuse box. Lift the lid (instructions are on the lid) and with the keyswitch on but the engine not running, press and hold the button that says "oil". The book says 5 seconds, but hold it for about 10. If someone is watching the dash lights while you do that, the change oil light should flash briefly.

Posted on Apr 02, 2009

  • 3 Answers

SOURCE: change engine oil soon light

I had the same problem what worked for me was to turn the key to run (without starting engine) go to the oil life screen and then press and hold the check mark button for several seconds. The oil life went back to 100 % instantly.

Posted on Oct 08, 2008

  • 11 Answers

SOURCE: "Change oil soon" light

Turn your key to the on position wait until all of your indicater lamps do their thing . Then pump the gas pedal 3 times in rapid motion in less than 5 seconds. Wait until you see the change oil light start flashing. If this does not happen then turn the key off turn it on again and repeat the procedure.

Posted on May 24, 2009

leethedeuce
  • 4472 Answers

SOURCE: reset change oil soon warning after oil change

Hi,
This is most likely because although you changed the oil you didn't reset it. Do this by turning the key all the way forward without starting the engine push the gas pedal to the floor 3 times in 5 seconds wait a second then turn key off then start the truck light should flash then go away.
If you still need assistance let me know.
Thanks,
Lee

Posted on Nov 05, 2009

johnjohn2
  • 5763 Answers

SOURCE: How do I reset the oil change light on a 2006

there are two types of displays heres both.hope this helps.for base instrument cluster.
1) press and release trip/reset button until setup menu hold reset displayed
2)press & hold trip/reset untilreset for sys check or sys check hold reset is displayed
3)release trip/reset button
4)press and release trip to scroll until hold reset if new oil is displayed
5)press and hold resetuntil oil life set to 100% and let button go you are done.
if you have a message center dash display then do this one. 1)push and release setup button until you see press reset to begin (2)press& release reset button until hold resetif new oil is displayed.(3)press and hold reset for 2secondsuntiloil set to 100%. done. hope this helps.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Now do I reset the message center


press and release the the set up button untll the mess. center displays reset @ oil change hold the reset button for apox. 5 seconds

Jun 11, 2012 | 2005 Ford Explorer

Tip

Pontiac service light 1983-01


Firebird

1998-01

To reset the "CHANGE OIL" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and goes out, the system is reset.


Grand Am


1999 -01

To reset the Change Oil light, open the driver's side instrument fuse panel and turn the ignition on. Press the "RESET" button and release. The light will flash. Press the button again and the system will be reset.


Grand Prix


1999-01

Driver Information Center If Equipped). Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure. To reset the OIL LIFE indictor if equipped with a Trip Computer: Press the trip MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to be 99 percent.


Grand Prix


1997-98

To reset the oil life indicator, press the "MODE" button until the light next to "OIL LIFE" is lit. Press and hold "RESET" for 3 seconds until oil life percentage is 100%.


Grand Prix SE


1997

Turn the ignition on, but do not start the vehicle. Within 5 seconds, push the accelerator to the floor 3 times. Turn the ignition off. Start the car and the Change Oil Soon indicator light will be reset.


Grand Prix

w/ Trip Computer

1988-93

To reset "CHANGE OIL", "CHANGE OIL FILTER", or the mileage of either on the Trip Compute, continually press the "SERVICE" or "SYSTEMS CHECK" button until the item appears with the mileage below it. Then press the "RESET" button and the mileage will be reset to the maximum value. If you want to reduce this value, hold the "RESET" button down and the mileage will count down. Release the button at the mileage you would like to observe.


Bonneville,
6000

w/ Driver Information Center

1983-91

To reset "CHANGE OIL SOON" or "OIL FILTER" or to adjust the mileage on the Driver Information Center, continually press the "DIC" button until either message appears with the mileage below it. At this point, hold down the button. In 5 to 10 seconds, the mileage will count down. When it passes 0, it will cycle back to a maximum figure. Release the button when the mileage gets to the service interval you'd like to observe. If "CHANGE OIL" or "OIL FILTER" already appears, just hold the button down to reset the mileage. "CHANGE OIL" and "OIL FILTER" are reset separately.













on Dec 07, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

How do I reset the change oil light after changing the oil. It did not go out.


Try this and if it does not work let me know.

1. Turn the ignition key to the "ON" position without starting the engine.
2. Fully press and release the accelerator pedal three times within five seconds.
3. If the CHANGE OIL SOON indicator flashes two times, or the display reads "OIL LIFE INDEX RESETTING 100%" then the system is resetting.
4. Turn the ignition key to "OFF", and then start the vehicle.
5. If the CHANGE OIL SOON indicator comes on and stays on, or CHANGE OIL SOON is displayed then the system did not reset and repeat the procedure.

1. To reset the OIL LIFE indictor if equipped with a Trip Computer, press the TRIP MODE button until the light appears next to OIL LIFE.
2. Press and hold the trip RESET button until the oil life percentage changes to 99%.

Sep 14, 2010 | 2001 Pontiac Grand Am SE

2 Answers

How to reset the oil life monitor


1994-99 BUICK LESABRE
CHANGE OIL SOON Light
1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil life display.
2. To reset light, turn ignition on. Open glove box to access oil reset button. Press and hold oil reset button in glove box for at least 5 seconds, but not longer
than 60 seconds. The CHANGE OIL SOON light will flash 4 times to indicate light has been reset.

May 14, 2010 | 1999 Buick LeSabre

2 Answers

How to reset the change oil light for a 2007 lincoln town car. Hitting reset button doesn't do it.


FIRST press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%
--------------------------------
Just pressing the reset button when the change oil light comes on while driving will not reset the computer

Feb 15, 2010 | 2007 Lincoln Town Car Signature Limited...

2 Answers

I have a pontiac g6 and my change oil light has been on. i went and got a oil change and nothing happened and i cant see where to put the tRANSNISSION FLUID??


With the "CHANGE OIL SOON" message displayed, press any of the three DIC buttons to clear the "CHANGE OIL SOON" message. Display "OIL LIFE RESET" on the DIC. Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset. Turn the ignition to "OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. on the 3.5 liter you have a dipstick near fire wall

Jun 13, 2009 | 2006 Pontiac G6

1 Answer

Oil change reset 2005 explorer


  1. Press and release the SETUP button until the message center displays PRESS RESET AT OIL CHANGE.
  2. Press and release the RESET button until the message center displays HOLD RESET TO CONFIRM.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

Mar 26, 2009 | 2006 Ford Explorer

1 Answer

Change oil light reset?


Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.

Nov 02, 2008 | 2002 Pontiac Grand Prix

1 Answer

Oil service reset


When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center;
  1. Press "ENG-DATA" button until the "OIL LIFE INDEX" appears.
  2. Press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).

This is what I found on your car bud. I hope that's what you're looking for. :)

Sep 21, 2008 | 1989 Cadillac Eldorado

1 Answer

1999 Pontiac Grand Prix lights are staying on


what is the procedure you are using can you explain it to me?
Resetting Procedure

To reset the CHANGE OIL SOON indicator if equipped with the Driver Information Center (DIC).

  1. Turn the ignition to ON without starting the engine.
  2. Fully press and release the accelerator pedal three times within five seconds.
    • If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF then start the vehicle.
    • If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure.
To reset the OIL LIFE indicator if equipped with a Trip Computer.

  1. Press the trip MODE button until the light appears next to OIL LIFE.
  2. Press and hold the trip RESET button until the oil life percentage changes to 100%.
Hope this helps Ill look into the ABS lights but I do believe that you will need a scan tool to retreive a code to be able to diagnose the reason for the lights



Sep 18, 2008 | 1999 Pontiac Grand Prix

Not finding what you are looking for?
2003 Buick Century Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...