Front blower stopped was coming on occasionally,rear blower works fine.Trying to locate the front blower motor resistor
Most resistor blocks bolt to the fan housing, be causes its air cooled
and must be near fan actual so it always is cooled. see?
i just looked,its there. dead center blower case.(fsm book)
alldata.com
log in and read the HVAC pages.
if fan fails on high too, its not the resistor, because on high
it bypassed.
ah but not if the thermofuse in the resistor block is blown
SOURCE: Blower Motor Resistor for front AC/Heater
remove glove box....its in the casing near motor.....2 screws and 1 connector
242 views
Usually answered in minutes!
×