Question about 2005 Mercury Mariner

2 Answers

Had front brake pads changed recently now abs

Had front brake pads changed 3 weeks ago, now abs light is staying on. I just paid $900 dollars at the dealer to have the air conditioner fixed and cannot afford anymore .Do you think this just some kind of code issue? I

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 353 Answers

If the dealer did brake work they should check for free, stress the fact that there was no light til after they worked on it

Posted on Jun 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 6,674 Answers

Could be just a sensor dirty, or bad connection. Who did the brakes?

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 buick rendevous. I skidded up to a


The pads should have been renewed when new rotar ,s were fitted,check anti squeal plates are still on the back of pads.

Sep 30, 2014 | 2004 Buick Rendezvous

2 Answers

Abs light staying on


The ABS light comes on when there is a malfuntion in the ABS system, not when the brakes are low. On a Ford you more than likely have a dirty sensor or pick up ring on the back side of the rotor. And no you do not have to change the rear drum brakes when changing your front pads but they should be inspected.
Usually you will change 2-3 sets of front pads before the rears need to be changed.

Jun 22, 2014 | 2005 Ford F-150 SuperCab

1 Answer

1993 Lincoln Town car 3 years ago on a very HOT day my right front brake started violently grabbing, even without touching the brake. The ABS light comes on intermittently, it usually goes off after...


I had a very similar problem in my 93 town car. I ended up changing the Calipers, rotors, and pads. This stopped the grabbing, but still every once and a while the ABS light would come on and grip the brakes on me. I ended up pulling the ABS relay from under the hood.and the problem has stayed away. The only thing is that now i dont ABS brakes. Its a heavy car tho and i havent had an issue yet. Also, if you decide to do this, the relay way mis marked in my car, when i pulled the ABS relay, the Air shocks went out instead. Had to pull one at a time until the anti lock light came on, then i knew i had it.

Jul 13, 2011 | 1993 Lincoln Town Car

1 Answer

Suddenly, No tail lights, brake lights, turns signal or back up lights At 83000 miles, 6 months ago, replaced head gaskets. 1 week later, service engine soon light came on. Tech said it was an oxygen...


just look for the blackened/burned pin on the rear light plastic connector and sand it down to re-establish a good electrical connection and save yourself $800 big ones on replacing the multiswitch.

Jun 26, 2011 | 1999 Chevrolet Venture

1 Answer

Ive just bought my audi a4 S.E 1.8 petrol 1998.. with 164k...when i bought it the abs lightt was on and also the brake warning indicator light comes on and stays on flashing,and at the same time the abs...


as the mot only says the "brakes work"to a certain efficiency,(the tester does NOT check the depth/thickness of the pads),chances are your pads/discs are in need of replacement.the pads have sensors in them for wear depth, so when checking the pads,front AND rear the abs sensors can be cleaned,and if done by a seat/skoda/vw/audi dealer they can put it on the diagnostic computer to give you a definative answer (this is cheaper than guessing) I replace the pads myself but get the car "diagnosed"when any red light shows.

Jan 31, 2011 | Audi A4 Cars & Trucks

1 Answer

Replaced back brake pads, but the abs light stays on


probbably a sensor is deffective or a snapped wire on the front where it moves about with the steering.
Have a nice day.

Mar 12, 2010 | 2003 Jaguar X-Type

1 Answer

2002 ram 1500 brake and abs light on


there should be adjustment under vehicle looks like bolt attached to cable just back off nut and loosen bolt 

Oct 06, 2009 | 2002 Dodge Caravan

2 Answers

My brake light keeps coming on everytime i turn a certain way, and my front brakes are making noise and i just changed them about 2 months ago.


Check the volume of fluid in the master cylinder reservoir. Low fluid would account for an intermittent brake light.
Check to be certain you are not leaking any fluid.
Noises may be from many causes.
Did you "bed" the pads & rotors?

Jul 15, 2009 | 2003 Kia Sedona

Not finding what you are looking for?
2005 Mercury Mariner Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...