Question about 1994 Volkswagen Golf

Open Question

94 vw golf radio safe mode

94 vw golf our radio went into safe mode, we got the code underneath the radio and can not input it.. we get the 1000 and when we go to enter the first digit using preset 1 we get nothing, it wont change however we can do the next three... what do we do now?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: re setting the radio on my VW Golf

heres what u do , switch radio on , safe appears in radio display , followed by 1000 approximately 3 seconds later , input the security code found on the radio card using the station preset buttons on the radio , Button 1 corresponds to the first number in the security code , 2 is the second and so on . press the applicable button repeatedly until the desired number appears in the display , ( press button 1 three times if the first number is 3 ), when the entire code has been input and appears on the display , press the right side of the seek button for longer than 2 seconds until an audible signal is heard , ,,, if you do not get this procedure correct , in 2 attempts , the radio will lock up for 1 hour before you can try again .. if this happens , leave the radio on for minimum 1 hour without touching it , after that time you may try again ..

J5

Posted on Jan 15, 2009

  • 4 Answers

SOURCE: oil pressure warning light is buzzing and i've

The prob is your water pump m8, I currently have the same problem on my golf3 auto.

Posted on Jun 18, 2009

  • 257 Answers

SOURCE: Hi, problem with 2007 VW Citi Golf radio security code.

The radio is in Lock-Out mode. You only get two attempts to enter the code, then it enters Lock-Out mode.
Put the key in ignition and turn on the radio for an hour (maybe a bit more). The radio should reset itself after about an hour and then you can re enter the code.

Posted on Jul 09, 2009

BRADLEYFRANC
  • 104 Answers

SOURCE: 97 VW Golf radio flashes safe

you have to leave radio and ignition on for 1hr till no.1000 appears,then enter code

Posted on Aug 06, 2009

  • 1 Answer

SOURCE: vw golf .... alpha...... safe 2

"2 safe" means that your radio was in safe mode, and then the code was improperly entered 2 times. you either need to disconnect your battery and leave it for up to 4 hours (i've been told), or leave your key in the ignition for around an hour.

once it comes out of "2 safe" mode, then it will just say SAFE and give you the numbers 1-0-0-0. You just need to enter the 4 digit code (using your pre-set numbers 1-2-3-4 to change the numbers), then hold the seek > button and your radio should come on.

If you don't have the code, call VW. they'll find your code for free. they did for me. if not they'll charge like $50 or something.

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Safe mode car radio


To unlock your VW factory radio from "SAFE" mode, you will need to enter the radio code. Typically, the code is written on a radio card included with the documentation for the vehicle when the car is first sold.

If you don't have the code, or have lost it, you can retrieve it by visiting your VW dealer. You will need the car's VIN number and the serial number of the radio (located on the body of the radio).

The procedure to enter the code is as follows:

Press the "MODE" and "SCAN" buttons simultaneously and hold them until "1000" appears on the radio display. Release the buttons as soon as this number appears.

Refer to your Radio Card and use the station preset buttons ("1", "2", "3" and "4") to input the code. Press the "1" button repeatedly to input the first digit, the "2" button to input the second digit, etc.

Press and hold the "MODE" and "SCAN" buttons simultaneously until "SAFE" appears again. Release, and the radio should be unlocked.

Do not enter the wrong code more than three times, or the radio will lock itself. Note the dealer can also enter the code for you (they may charge a small fee).

Oct 17, 2013 | Volkswagen Cars & Trucks

1 Answer

Anti-theft radio security code


Will display safe mode but you have to push the on button then you will get the 1000

Apr 10, 2013 | 1999 Volkswagen Cabrio

2 Answers

I lost my radio code for 2007 citi golf 1.4 now is in safe mode


2007 VW Golf Rabbit I HAVE THIS TIPE OF RADIO ON MY CAR AND I HAVE THE CODE # 0881 . CAN ANY ONE HELP ME Code Entering STEPS PLEASE
POUTCHIUSA@GMAIL.COM
lost-radio-code-2007-citi-golf-1-4-now-5tfmgp03zsfdrclfgmpn1ukz-2-0.jpg

Mar 05, 2013 | 2007 Volkswagen Golf

2 Answers

Since changing my battery, vw gamma radio has gone into safe mode, can anyone help me?!


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Apr 17, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Vw golf 2001 radio code


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Volkswagen Golf radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!


Please do rate my response. Thanks!

Feb 24, 2011 | Volkswagen Golf Cars & Trucks

2 Answers

I have a VW golf 1999 but I cannot get the safe mode off the radio. Struck in mode with the number 2 in the lethand corner. Any suggestions on how to fix?


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from an VW dealer!

The sequence of programming for VW radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jan 02, 2011 | 2001 Volkswagen Golf

2 Answers

97 VW Golf radio flashes safe


you have to leave radio and ignition on for 1hr till no.1000 appears,then enter code

Jun 19, 2009 | 1997 Volkswagen Golf

1 Answer

Re setting the radio on my VW Golf


heres what u do , switch radio on , safe appears in radio display , followed by 1000 approximately 3 seconds later , input the security code found on the radio card using the station preset buttons on the radio , Button 1 corresponds to the first number in the security code , 2 is the second and so on . press the applicable button repeatedly until the desired number appears in the display , ( press button 1 three times if the first number is 3 ), when the entire code has been input and appears on the display , press the right side of the seek button for longer than 2 seconds until an audible signal is heard , ,,, if you do not get this procedure correct , in 2 attempts , the radio will lock up for 1 hour before you can try again .. if this happens , leave the radio on for minimum 1 hour without touching it , after that time you may try again ..

J5

Jan 15, 2009 | 2001 Volkswagen Golf

2 Answers

Vw golf .... alpha...... safe 2


"2 safe" means that your radio was in safe mode, and then the code was improperly entered 2 times. you either need to disconnect your battery and leave it for up to 4 hours (i've been told), or leave your key in the ignition for around an hour.

once it comes out of "2 safe" mode, then it will just say SAFE and give you the numbers 1-0-0-0. You just need to enter the 4 digit code (using your pre-set numbers 1-2-3-4 to change the numbers), then hold the seek > button and your radio should come on.

If you don't have the code, call VW. they'll find your code for free. they did for me. if not they'll charge like $50 or something.

Dec 24, 2008 | 1997 Volkswagen Golf

Not finding what you are looking for?
1994 Volkswagen Golf Logo

Related Topics:

696 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...