Question about 1995 Nissan Pickup

1 Answer

Cam shaft timing marks - 1995 Nissan Pickup

Posted by on

  • 2 more comments 
  • robals Jun 28, 2009

    Sorry, 1995 petrol 2.4l

  • robals Jun 29, 2009

    thanks for the help when i opened it found it was twin cam, what now??

  • mx5turbo92
    mx5turbo92 May 11, 2010

    what motor ?

  • George May 11, 2010

    What engine , What year ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Twin cam or single? if it's single the cam gear has a notch on it it poits to top bottom crank points to 0 mark the #1 piston at TDC distributor pointing to #1 on cap and your set.

Posted on Jun 28, 2009

  • 1 more comment 
  • Bruce Hathcock Jun 29, 2009

    The timing marks would be the same for both cams but go to your local Schucks shop or auto-zone and they can print out a diagram for you if you buy the parts from them,.But most cars with two cams are set with the cam dots pointing up, but don't take my word for it if it's a 2.4 I can send you a diagram and the directions on how to do it, it is a 2.4L my guess. let me know and if it's carburated or EFI.

  • Bruce Hathcock Jun 29, 2009

    I can send you a diagram but if you are not going to rate me I might as not answer your quesion as you lower my score by not answering.

  • joe tapia Jun 11, 2011

    i just put a timing cchain in a 1995 nissan truck, didnt move any marks put it back on th same way it came off but i had a problem wit the oil pump and shaft, finally got it back in the engine started but cant set it right, it wont idle by itself, cant find diagrams or marks or how to set the shaft on the distributor i would greatlly appretiate any help u can give me oh and its a 2.4 thanks my email is jtapia752@gmail.com

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: NEED TO KNOW TIMING MARKS ON 84 S-10 2.8

the timing is set to 8 degrees at 700 rpm...if it helps any

Posted on Aug 07, 2009

gregstobbe
  • 56 Answers

SOURCE: timing mark for charade 90 model 3 cylinder

here is the site for timing marks.
http://www.2carpros.com/car_repair_information/tec_info/1990/daihatsu/charade/1990_daihatsu_charade_timing_belt_diagram_marks.htm
Ps. dont forget to rate my solution please. Thanks.

Posted on Dec 27, 2008

  • 73 Answers

SOURCE: 96 camry 2.2L, What timing marks do you use to

the 2 single dots on the inside of the gear(side facing the rear of the motor) When the gears mesh together the 2 dots should line up.

Posted on Sep 21, 2009

  • 1757 Answers

SOURCE: mazda b 2500 how to set timing when the timing belt has broken in

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Timing Belt and Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1998/make/mazda/model/b2500/1998_mazda_b2500_timing_belt_diagram_marks.htm

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Diagram for engine timing for a 3100 Chevy V6


It's on TDC so align marks on cam shaft and crank shaft with center of cam & crank shafts and the ECM will go from there. so you will have to change the timing chain if its loose or worn out.

May 08, 2014 | 1997 Chevrolet Monte Carlo

1 Answer

Timing mark on crank and cam shaft on 1993 Toyota tercel


The timing marks are at 12 o'clock on the cam shaft pulley and at 6 o'clock on the crank shaft .

Dec 28, 2013 | 1993 Toyota Tercel

1 Answer

Timing chain marks needed for Audi A4 B9 1.8tfsi 2009 model. Engine was taken out and settings not marked. This is extremelyurgent. Please help


diagrams I have show a twin cam set up with 2 balancing shafts. The marks on the cam shaft point to (left cam shaft 11 oclock the mark on the right point to the 1 oclock position. The chain will have 3 black links-- the top black links will be at the timing marks on the shafts with the 3rd black link directly at 6 oclock facing a mark on the gear. The balancer marks both point to the 1 oclock position with black links on each and the 3rd black link will be facing a mark to the 7 oclock position on the crankahaft gear. Everything is done with the piston at TDC no 1 cylinder so get it there before you put the cam shafts in position or you will bend valves. Crank shaft gear is not keyed to the crank shaft. there are dots on the right hand balancer shaft gears and these dots will be as the 2 dots on adjacent teeth either side of a dot on the meshing gear. I suppose that is all as clear as mud but if you got this far then you will see the marks and marked links on the chains

Dec 22, 2013 | Cars & Trucks

1 Answer

Diagram_hyundai trajet V6 2.7Ltr engine ( 2000 Model )


  • You want to align the Crank and Cam gears timing mark with the corresponding mark on the engine itself.

  • Camshaft Mark ---


11_3_2011_7_37_49_am.jpg
  • Crankshaft Marks.

11_3_2011_7_40_20_am.jpg
  • Here is your firing order


11_3_2011_7_44_35_am.jpg

  • Hope this helps.

Nov 03, 2011 | Cars & Trucks

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

How do i time my Golf 1 correctly? it consumes a lot


its tricky enough if your not sure what your doing but ill run you through it. 1. remove top rocker cover and timing belt cover. 2 make up the position of the pully on the cam shaft at the top and the drive shaft at the bottom, this marks are you fail safe incase you cant time the engine. 3 remove the timing belt and pully tentioner, note if your going this far you are as well to replace the timing belt,tentioner and water pump. 4 On the cam shaft at the top if you force them to turn you will see a small indicator mark on the shaft this mark has to line up with the other indicator mark on the housing between the cam shaft and the cam shaft pully, once they line up your top end is timed, mark up the pully incase it moves. 5 on the drive shaft pully there is also markings that have to line up but you can also feel the position of the pully as you turn it, you will feel the piston been forced up and it is timed at top dead centre on cylinder one, which means the the piston has to be at the top just before the point of returning back down, using your feeling as a guide and the markings lined up you will have timing. also mark up this pully, your new marking should be very very close to the fail safe markings you put on at the start. when you have your marking replace the timing belt with the longest distance between pully contact going on first, try not disturb your timing or your hard work will have been for nothing, make sure the tentioner on the belt is tight but not to tight to the point where you ll stretch the belt or snap it, put everything back as you found it and crank the engine, job done, best of luck. hope this helps( rate me on my answer thanks )

Aug 27, 2010 | 2000 Volkswagen Golf

1 Answer

1996 Diamante will not crank after changing water pump


I aligned the crank shaft,,water pump pulley. and the cam shaft marks up and recheck the origninal marks I made to save time....one of the cam shafts had slipped enough to cause it to be "off time" and the computer could not correct for it...realignment of the marks and making sure nouthing changes was the solution..

Jun 03, 2009 | 1997 Mitsubishi Diamante

1 Answer

Timing marks


The timing marks are located on the front crankshaft pully, and under the cam shaft cover on the front of the front cam bearing cap and the cam shaft. On number one TDC all of these makes should be aligned,

Feb 20, 2009 | 1988 Alfa Romeo Spider

1 Answer

Timing marks 2002 sonata 4 cyl twin cam balance shaft marks


look for marks on the timeing gears there sould be a couple notches. then bring them center to center

Dec 24, 2008 | Hyundai Motor 2002 Sonata

1 Answer

2000 Ford Escort ZX2 hot, 2.0 Zetec eng.


a friend of mine set the crankshaft, it turns out that the key-way is on top and is the mark for the lower part. we looked in the haynes manual for the top cam-shaft's. we never had a cam-shaft alignment tool but found a scrap piece of metal that worked perfectly for the cam-shaft alignment. the timing belt is on one side of the engine and on the other side of the cam-shafts are slots where the cam-shaft alignment tool, you have a 25% chance of getting it right and we got lucky on the 1st try, thanx any way.

Jun 29, 2008 | 2000 Ford Escort

Not finding what you are looking for?
1995 Nissan Pickup Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...