Question about 1989 Chevrolet S-10 Blazer

3 Answers

Replaced distribitor and rotor now wont start on 91 chevy blazer

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 27 Answers

Make sure u have the wires in the correct spots, there is a firing order, u need to have them in the right spots or else it wont fire, call ur local parts store and they will give u the firing order

Posted on Jul 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A bad ground burned the coil up. Plastic smoked out the bottom.
After a new coil, computer, control mod, pickup coil, cap,rotor,plugs,wires. What else is there? I heard there is a wire that could have an open. Which one is it?

Posted on May 25, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Did u replace distributor and rotor or cap and rotor?and what engine size v6?

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New coil ,new distribitor, not just cap and rotor the full distribitor. no spark at plug,wont start


Have tou checked your fuse box? Crank position sensor check engine light, suggest you imclude car and model.

Nov 03, 2015 | Cars & Trucks

1 Answer

1993 s10 chevy blazer taho 4.3l v-6 replaced the distributor cap rotoe and the Ignition control module now it wont start at all


what was the reason for replacing cap rotor and module? any loose or corroded connectors?

Oct 13, 2013 | Cars & Trucks

1 Answer

My 2000 chevy blazer will file but wont start sometimes


not knowing the condition of you suv, replace fuel & air filters, very important, replace distributor cap & rotor, spark plugs & plug wires. that should do it, good luck

Mar 10, 2013 | 2000 Chevrolet Blazer

1 Answer

How do put my 1991 Chevy C1500 truck with 4.3 back n time on motor and distribitor


PULL THE SPARKPLUG OUT OF THE #1 CYLINDER ROTATE ENGINE OVER TO FIND TOP DEAD CENTER ON COMPRESSION STROKE REMOVE DIST. CAP AND SEE WHERE THE ROTOR IS POINTING AND ADJUST SO THE
#1 WIRE IS LINED UP WITH IT

Nov 20, 2012 | Cars & Trucks

1 Answer

1999 chevy blazer not starting


Check the plug wire from the ignition coil to the distributor cap.
If you haven't already, replace the distributor cap and rotor.
The GM Vortec's have issues with moisture getting inside the cap and rotor and causing problems.

Apr 24, 2012 | 1999 Chevrolet Blazer

1 Answer

Blazer wont start


You are getting good spark to the plugs? Have to assume you retimed it after you changed the rotor and cap. Wires are good?

Could be the ignition module, but they usually are either good or bad and not itermittent(sp)...

If it trying but just not 'catching'.. seems like a timing issue, or possibly the coil (although coils tend to be good or bad as well)

Mar 06, 2010 | 2000 Chevrolet Blazer

1 Answer

1999 chevy blazer wont start


THE FUEL PUMP IS BAD.

if your losing fuel pressure after the pump runs the drain back valve in the pump has failed.

and i doubt that you are seeing enough fuel pressure to run a vortec engine.

low fuel pressure equals a non running vortec

Apr 11, 2009 | 1999 Chevrolet Blazer

1 Answer

91 chevy s-10 blazer


sounds to me like water may have possibly gotten into the engine spark plug areas and are preventing the engine from sparking.

Jul 28, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...