Question about 1989 GMC Sierra

1 Answer

When i turn my lights on the right light and brake light stay on. How do i fix it so when i hit the brakes both brake lights come on?

Posted by on

  • jwa1629 Jun 27, 2009

    Will this fix the fact that, the left one comes on when you push the pedal. but when the lights are on it doesnt work at all but the right one stays on. I have already replaced the light switch and the brake switch.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

The board where the tail-light bulbs plug in may have melted. Check it out !

Posted on Jun 27, 2009

  • honeymokey
    honeymokey Jun 28, 2009

    Yes, take it apart and look first. Also if you have a trailer connector check for broken or damaged wires.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights stay on till you hit right blinker then they go out also if right blinker on and you hit brakes light stays on solid


Replace your brake switch on the pedal. If problem continues you have a bad ground somewhere

Mar 11, 2015 | Cars & Trucks

3 Answers

01hyundai elatr brak lights are stay on and park lights in the front are to but u hit the brakes and the lights go off why is it doing that and why


sounds like u have a bad brake light socket or the parking light filament in one of ur bulbs has blown and is now touching the brake light filament causing it ti cross power

May 16, 2014 | 2006 Hyundai Sonata

1 Answer

Signal lights on dashboard


I would start at the left brake light. Check the bulb and wiring. Your brake light could be grounding through the blinker circuit.

May 13, 2013 | 2000 Chevrolet Venture

2 Answers

Brake lights staying on when car comes out of park 2002 ford focus


Clint, you might want to check your break switch to see if your button is stuck. It is right above your brake pedal. The pedal led actually hits the button of the switch. See if you can loosen it.

Mar 02, 2011 | 2002 Ford SVT Focus

3 Answers

1996 Buick Century 6 cyl. The brake lights stay on after the ignition is turned off. Where is the brake light switch located and how do I remove it?


Hello

The break light switch is down under the dash. Follow the brake pedal up and your hand will hit it. Release the tabs and slowly pull the connector out and the lights should turn off.

have a great weekend.

Nov 26, 2010 | 1996 Buick Century

2 Answers

My dome light comes on when I hit the brakes. I


SIMPLE FIX I THINK..TRY SQUIRTING SOME BRAKE CLEANER OR WD-40 INTO THE DOOR OPENING THAT CONNECTS TO THE CAB WHEN YOU SHUT THE DOOR..THE DOOR LIGHT SWITCHES ARE IN THERE AND SOMETIMES IF THEY GET DIRTY THAN CAN LOSE CONNECTION..TRY IT IT IS FREE AND TAKES 2 SECONDS..SPRAY LIBERALLY YOU WONT HURT ANYTHING..

Jul 08, 2009 | Ford Ranger Cars & Trucks

1 Answer

I have replaced the light bulb and the fuses and on the brakes lights, when i hit the brakes the lift brake lights work, but the the other two wont. How can i fix the problem?


try working the turn signal switch since brake lights are routed through it-sounds like the right turn section of ts switch isn;t disengaged

Apr 09, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

2001 saturn L100 brake lights stay on when lights are turned on


check for incorrect brake light bulbs or tail lights. Some look the same but are different.

Apr 04, 2009 | 1999 Saturn SL

1 Answer

Right tail light not working when pressing brake w/ lights on.


There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.

Nov 13, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...