Question about 1985 Nissan 300ZX

1 Answer

Electric seats will only go one way

I have a 1985 Nissan 330 ZX. The electric seat on the drivers side will go forward and backwards but the back part (where you put your back) will not move forward but will move backwards. The manual butten seems like it won't work and does not go in a stationary mode-just slides back and forth. So basically, I look like I am driving reclined from the back seat

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

You need to check for power at the motor when you try to activate the switch. If there's power then you have a drive cable issue. If this is a manual seat then the problem is the actuator assembly itself,the cable,mechanism,etc. Remove the seat & take a good look at it. You'll see a problem,write back.

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my Nissan drivers seat move forward and back?


check for the release wire fully releasing the lock on that side. when you pull on the release lever it is to pull both release locks so the seat will move.

Sep 29, 2014 | 2005 Nissan Murano

1 Answer

Why won't 2000 nissan maxima passenger seat go backward ?


try to look under the seat for coins that have fallen down and got stuck in the track. it happened to mine!

Apr 07, 2013 | 2002 Nissan Maxima

2 Answers

1985 buick riviera power seat wont move back


You have a damaged drive gear in the seat, the parts are no longer sold for this ol of a model so your best bet is to try and locate a used one.

Feb 09, 2012 | 1985 Buick Riviera

3 Answers

How do i take the back off on a 1999 nissan maxima bucket seat


Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 | 1999 Nissan Maxima

2 Answers

Push forard on the drivers side electric set and


It isn't wired wrong. Mine does the exact same thing, but it didn't used to be backwards and the wiring has never been changed.

Jun 05, 2010 | 2004 Chevrolet Suburban

1 Answer

Driver,s seat no longer slide forward and backward


Check for obstuction on seat track or try listening to see if you can hear seat motor operating. if you can't hear motor operating check fuse.

Mar 21, 2010 | 2004 Nissan Murano

2 Answers

The electric front seats both stopped moving


Check the fuse box for a blown fuse, both seats may operate on one fuse depending on the model of vehicle and the fuse may be located either under the dash on the drivers side or in the engine compartment on the drivers side.

Aug 21, 2009 | 1995 Lexus GS 300

1 Answer

Bucket seat shifts forward and backward


i had the same prob when i got my durango.i set the seat where i was cumfortable and still where my wife could be cumfortable drilled two small holes on the side of the rail and shot two rivets through it.all the other controls work the same but it doesnt go back and forth anymore.works for me ,alot cheeper than a power seat.

Apr 12, 2009 | 1998 Dodge Durango

1 Answer

The lever to move the driver's seat forward and backward doesn't


The reason is that your sliding grips have been slipped and therefore jammed at one position.

Remove the seat open it's sliding grips and replace it.

Jan 28, 2009 | 2002 Nissan Pathfinder

2 Answers

Power Seat on Drivers side want go forward or backwards. It works in the other positions but now forward or backwards.


Good day;
What year is you car? Does the other controls work for the seat? and just to clarify the seat won't go forward of back?


Cheers

Aug 25, 2008 | 2001 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...