Question about 2003 Lincoln LS
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The back door panels are indeed on with clips they are just built extremely well remove the four screws and use your own light handed strength and pull firmly i also used a clip puller in some spots,but some of the clips are in the center more than on the edge.
3 screws along the bottom of the panel the first being closest to the back of the car and easily found. The other two are just above the weather strip on the bottom which if you get low enough you will see fairly easy. There are 2 more screws in the door handle, get a flat screwdriver and pop up the cap from the side closest to the cars interior when door is closed(It won't pop off it will hinge). Once you get those two screws out the handle will be able to be popped out. Then remove the ashtray,and pop the window switch out. Disconnect window switch with a flat screwdriver, then your ready to remove just pull steady around outsid of panel all the way along and the clips will pop out one at a time. if any break don't worry you can pick new ones up cheap at any parts store and they slide right in. Good luck
Posted on Oct 17, 2009
SOURCE: rear brakes
The caliper is probably stuck, I had to replace one of mine, drivers rear. The piston on the caliper screws back in, so you'll need a caliper press to seat the piston.
Posted on Nov 11, 2008
you can try feeding the switch direct but you will need to find out which wire carries the power to the switch,this can be accomplished using a test light or small meter. when you find which wire carries the power to the switch then you by-pass the switch and put the power to the other side of the switch manually instead of using the switch and the door lock will undue ut self. then you can change the door lock actuator.
Posted on Aug 03, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Mar 17, 2017 | 2005 Lincoln LS
Sep 22, 2015 | 2003 Lincoln LS
Nov 11, 2011 | 2000 Lincoln LS
Jul 11, 2011 | 2001 Lincoln LS
Feb 23, 2010 | 2002 Lincoln LS
Sep 26, 2009 | 2002 Lincoln LS
Jul 30, 2009 | 2000 Lincoln LS
Jun 10, 2009 | 2000 Lincoln LS
Feb 15, 2009 | 2001 Lincoln LS
307 people viewed this question
Usually answered in minutes!