Question about 1997 Chrysler Concorde

1 Answer

I just bought this car a couple of weeks ago, and I've noticed the horn doesn't work, i already replaced the relay so i most need a new horn, but the problem is I cant find it, I checked in front of the car but still don't see it. Do you know where it's located. Also the alarm doesn't work, would this be because of the horn??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 363 Answers

Check the fuse, to access fuse panel open drivers door and remove end cover of dashboard

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi and low tone horn will not work


Replace the one that smokes, not both of them.

Apr 04, 2017 | 2003 Toyota Camry

1 Answer

Bought a 1992 acura vigor and found horn fuse missing. when I replaced the fuse alarm goes off and constantly sounds. how do I stop it? I've read that there's a relay somewhere under the hood


horn relay located on the right side kick panel,you will see a row of relays,if horn relay is okay, more likely your horn control pad has a short inside causing horn button contacts to stick causing horn to keep blowing.

Oct 01, 2012 | 1992 Acura Vigor

1 Answer

2004 Chevy Cavalier - car cranks over but doesn't start


Ignition module or crankshaft postion sensor . Test it in the vehicle , test light , volt meter . Videos on youtube .
2004 Saturn Ion 2 2 Misfire Case Study P0300

Mar 25, 2017 | 2004 Chevrolet Cavalier

1 Answer

1988 ford broncho horn doesn't work ,relay clicks when horn button is pushed,I replaced the horn it still doesn't work. what should I check next.


OK, try to use a test light and connect the horn lead to ground to see if there is current, and to see if it sounds. If it does, then the wiring is fine to the horn itself. The relay may click, but are the contacts ok? Maybe swap out the relay for a new one.

Nov 04, 2011 | Cars & Trucks

1 Answer

2003 - RX300 I'm tring to change the battery,when I connect the negative terminal, the horn blows and won't stop... I've turn the key to start and nothing happens, the horn keeps blowing.......


I would check to see if this is a relay problem for the horn. Remove the relay for the horn and see if you can swap it with another to confirm it is bad. If with another relay it doesn't stay on you no it was just a relay so go get a new one. The only other thing could be a security issue and when you discharged the power by unhooking battery the vehicle is acting like it has been broken into. But i would say it's a relay problem. Good Luck.

Jul 26, 2011 | Lexus RX 300 Cars & Trucks

1 Answer

Hello, I have a Ford escort 1.8 55D van. A few months back I fitted a new indicator stalk unit for the MOT as the high beam use to flicker on its own, all then fine. A couple of weeks ago the indicators...


typical UK reg motor they corrode like ?-?-? ,i suspect that your horn has stuck up with corrosion and the indicators is the hazard light warning switch faulty .But i could be wrong and often am but check it out anyway.I try not to repair UK or northern europeon vehicles anymore as i spend more time cutting off rusty bolts and seized bits than whats the cars worth compared to spanish vehicles that can be 20 yrs old and i just whistle and the bits come undone

Jul 18, 2011 | Ford Escort Cars & Trucks

2 Answers

I have a 2005 Chevrolet Classic and my horn just stopped working about a week ago. I noticed first that it didn't sound when I activated my alarm, then confirmed it when someone cut me off in traffic and I...


it usually shares a fuse with dome lights and/or radio you may have other electrical accesories not working; also the horn itself could have quit working

Jul 28, 2009 | 2005 Chevrolet Malibu

2 Answers

My horn stopped working


well you have two choices you can run a new cicruit which means you need a wire to a fuse and then a wire to a switch and then to the horn and then ground and that will be some work. your other choice is much simpler. find where the old horn is and change the connector to fit the new horn. remove the old horn and replace the new horn in the old spot and ground the horn if you need to since some have a one wire and a body ground so you wont need to hook the ground to anything but the bolt if you need to do that.

Jul 01, 2008 | 1992 Saturn SC

Not finding what you are looking for?
1997 Chrysler Concorde Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...