Question about 1994 Buick Skylark

1 Answer

Lost vacuum at defrost & vent & floor control.

I have a 1994 Skylark and have lost vacuum at defrost and vent and floor control. Where can I find a diagram showing direction and routing of vacuum line to throttle body?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

It does not hook to throttle body , it hooks to a vacumn port on the intake manifold. Follow hose from cruise control module to the tee-three-way connector on firewall. Over time the tee will fall apart and will leak One hose goes to the vacumn port, one to cruise module,one to ac contols.

Posted on Jun 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air does not blow through vent on 1994 chevy silverado


Which vents, floor--defrost--dash? Can you hear the blower motor running? The squirrel cage could have broken loose from blower motor? There could be an actuator problem under the dash? If actuators are vacuum controlled and vacuum is lost, it might default to defrost, only blow out defrost vents.

Nov 06, 2016 | Chevrolet Silverado Cars & Trucks

1 Answer

Air vent stays in vent position


check emissions vacuum for disconnected lines as most climate controls use vacuum baffles for air flow..

Feb 24, 2013 | 1994 Honda Accord

1 Answer

Air conditioning will not switch from defrost vents


Vacuum control motors are used to position these airflow control doors.
SECTION 412-01: Air Distribution and Filtering 2000 Expedition/Navigator Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/17/1999 Air Distribution There are two sources of air available to the air distribution system:
  • outside air
  • recirculated air
Recirculated air is only used during MAX A/C, AUTOMATIC (if equipped with EATC) and OFF modes.
Air distribution within the vehicle is determined by the function selector switch position, if equipped with manual A/C, or is controlled by the electronic automatic temperature control system in the AUTOMATIC mode but can be overridden by the driver if desired. Airflow control doors are used to direct airflow within the heater air plenum chamber. Vacuum control motors are used to position these airflow control doors.
The air distribution system is designed to provide airflow from the defrost nozzle when no vacuum is applied to any of the vacuum control motors. This is done to prevent a situation where defrost cannot be obtained due to a system vacuum leak.
Air enters the passenger compartment from the:
  • instrument panel A/C registers.
  • heater outlet floor duct.
  • windshield defroster hose nozzle.
  • side window demisters.
  • rear seat airflow duct (if equipped).
Passenger compartment air is exhausted from the vehicle through open windows or cab air vents.


expedition air flow hvac system-xvcmtr1jbqa4kfrdszeh0lpe-3-0.gif Item Part Number Description 1 18A318 Vacuum control motor - panel/defrost door 2 18A478 Panel/defrost door (full vacuum position) 3 - Defrost airflow 4 - Side window demister airflow 5 18B545 Temperature blend door (full heat position) 6 19860 A/C evaporator core 7 19A813 Air inlet duct door (full vacuum position) 8 - Outside air inlet 9 18A318 Vacuum control motor - air inlet duct door 10 - Recirculated air inlet 11 19805 Blower motor 12 - Vacuum to emission control 13 - Vacuum from the engine intake manifold 14 19A563 A/C vacuum check valve 15 19A566 A/C vacuum reservoir tank and bracket 16 19B888 A/C-heater function selector switch 17 18476 Heater core 18 18A559 Floor/panel door (full vacuum position) 19 - Floor airflow 20 18A318 Vacuum control motor - floor/panel door 21 - Panel vent airflow
Check vacuum control to the panel defrost motor ( vac,diaphragm )

Nov 01, 2017 | 2001 Ford Expedition

2 Answers

Wont come off defrost


Usually a blend door problem. You will need to check the power source for the door and its operation.

Jul 11, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

1997 olds 88 a/c blows out of defrost ¬ out of


Vent control has lost vacuum since that is what powers it. The default direction is the defrost. Pul radio sectiion and look for a loose hose.

Jun 05, 2011 | 1997 Oldsmobile 88

4 Answers

Heating / air conditioning control stuck to front defrost vents


There is a vacuum leak under the hood. Find the vacuum line on the passenger side where it comes through the firewall and follow it to the engine. You system needs vacuum to operate and without it the default setting is on defrost for safety reasons.

Jun 19, 2009 | 1999 Dodge Durango

1 Answer

1996 ford mustang convertible ac blows cold only from defroster


Does it still blow out the floor and defrost when you set the switch to those positions or does it alway blow out the defrost no matter what? If you can get air to blow out to the floor, then it sounds like you lost the switch that controls the airflow to the vents. If it only blows out the defrost, then you probably lost the vacuum to all of the switches. When the vacuum is lost, it will only blow out the defrost. Check the smallest line on the vacuum distribution block located in the corner near the brake master cyclinder. That line provides the vacuum to control the direction of airflow within the cabin.

Jun 08, 2009 | 1996 Ford Mustang

1 Answer

Vent selector inop


U have either lost the vacuum to the mode selector switch (in the dash control) or the vacuum mode selector switch is leaking in the ac/heater control in the dash, u can usually hear a hiss if it is leaking. the vacuum source is the engine, a small hose runs through the firewall on the passenger side to the switch from the eng vacuum source.

May 19, 2009 | 1994 Chevrolet S-10

Not finding what you are looking for?
1994 Buick Skylark Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...