Question about 1999 Chevrolet Silverado 1500

1 Answer

Pwr window problem with '91 chevy pickup

Switches are good, changed circuit breakers although 1 is hot to the touch, fuses are good. Both windows do not operate after changing the heater core.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Look for pinched wires behind the heater box that go from door to door

Posted on Jun 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the power windows fuse in 1984 gmc tk


Probably not a fuse, but, a circuit breaker. If the circuit breaker gets hot it may trip. If it trips none of the windows will work. You can also check for voltage at the circuit breaker. I have felt of circuit breakers that were hot to the touch, that particular vehicle had a bad window motor. My info for your model year isn't the best.
26210855-bz2l2bzymdazm0k5tay4q30h-5-0.jpg

Jun 02, 2016 | GMC Cars & Trucks

1 Answer

I have 2005 saturn vue the windows want go down. Is there fuse for this that may need to be replace?


There is PWR WDW circuit breaker 30 amp in the under hood fuse / relay box . This powers the windows through the PWR /WDW relay in same under hood fuse / relay box . I would think the relay would be bad before the circuit breaker . Hope this helps you out , good luck

Apr 25, 2016 | Saturn Cars & Trucks

1 Answer

I have a 2008 Chevy Impala, not of the windows go down, Any suggestion


Did you check the PWR WDO Circuit Breaker 25 amp ? Check for battery voltage at the driver window switch ?
Fuse Block - Instrument Panel
In the right front kick panel

Automotive Repair Power Window Troubleshooting

Jan 15, 2016 | 2008 Chevrolet Impala

1 Answer

Power windows dont work


There is a circuit breaker for power windows .
Power Window System Components
The power window system consists of the following components:
?€¢
Driver Door Switch (DDS)


?€¢
Passenger Door Switch (PDS)


?€¢
Body Control Module (BCM)


?€¢
Rear door power window switches


?€¢
Power window motors in each of the doors


?€¢
PWR WDO Circuit Breaker


Power Window System Controls
The power window system will operate anytime the Retained Accessory Power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The driver master control switches are integrated into the DDS. When a power window switch is activated in the up or down positions the DDS supplies power and ground to the window motor control circuits to drive the window motor in the required direction. Prior to activating a power window motor the DDS will supply the control circuit with a low current bias voltage in order to determine that a short to ground condition does not exist and during window motor operation the DDS continues to monitor the motor current to verify proper window motor operation.
The DDS controls the passenger window by a serial message to the PDS. When a power window switch is activated in the up or down positions the PDS supplies power and ground to the window motor control circuits to drive the window motor in the required direction. Prior to activating a power window motor the PDS will supply the control circuit with a low current bias voltage in order to determine that a short to ground condition does not exist, and during window motor operation the PDS continues to monitor the motor current to verify proper window motor operation. (Scan tool support is available for this system
Check this circuit breaker
RETAINED ACCSRY PRW BRKR 30 amp. located in the left instrument panel fuse box . if the breaker is good check power B+ at the drivers door switch . connector 1 terminal b yellow wire . Sometimes the wires inside the rubber boot coming from body to door break .

Oct 29, 2015 | 2005 Chevrolet Impala

1 Answer

This is the fuse panel cover for a 1999 1500 Chevy Silverado which fuse controls the driver side window switch


The picture is too dark. Usually the power windows, all of them, are protected by a 25 or 30 amp circuit breaker. It is usually found in the instrument panel fuse block, under the dash on the driver's side. The circuit breaker is a matchbook size "fuse", usually silver colored. A circuit breaker automatically resets if it gets tripped by like a short.

If you pull off the master switch, the driver's side switch, you should have one hot wire with key on. The power wire and the ground for the windows are both in the driver's master switch. This is where you begin testing the power windows if none are working. Check for a hot wire, and check the ground wire- use a multi-meter.

Jul 19, 2015 | Cars & Trucks

1 Answer

My power windows will not work. Where is the circuit breaker or which fuse is it


The fuse marked "PWR WND" or if there are only numbers, check for an index of what number the fuse is for the windows. ( I don't mean AMP rating of the fuse.) If the fuses are good, it may be a bad switch.

Sep 11, 2013 | 2000 Volkswagen Cabrio

1 Answer

I need an electrical diagram showing wiring from the base,to power windows on a 2003 Chevrolet Venture,my power windows won't work either side in my 2003 Venture,checked power at fuse box next to...


Check the main fuse box next to the battery, # 8 max fuse powers IGN MAIN 2 Ignition Switch to Fuses (I/P): BCM PRGRM, FRT HVAC LOW/MED BLWR, FRT WPR/WSHR, HVAC/DRL, MALL/RADIO/DIC, PWR QRT VENT, RR HVAC, RR WPR/WSHR, SWC ACCY & PWR WDO Circuit Breaker.

#3 circuit breaker is the front window breaker, try swapping it out with another breaker beside it and thats located in the side dash panel also.

The common cause of failed power window function is the switch on the doors going bad from dirt. Does the power window on the passenger side go down with the passenger side switch?? if it does then its a bad drivers side and and try cleaning the switch with electrical contact cleaner. 95% of the time this will save you from buying a new switch.

keep us posted and thanks you for using fixya

Nov 01, 2011 | 2003 Chevrolet Venture Passanger

1 Answer

Power windows stopped working 2005 chevy impala


If they all just stopped at one time, it sounds like the circuit breaker is bad. That circuit breaker is located in the fuse panel inside the vehicle (below is a picture of its location). Also below is a picture of the fuse layout. The circuit breaker you may need to replace which is its only circuit that it works for (power windows & sunroof only if you have a sunroof) is the one in the diagram marked "RETAINED ACCSRY PWR BRKR". That breaker is supposed to reset itself after an overload but they do get weak after time. I would put money that is the problem. I hope this helps and good luck.


clifford224_908.gif

clifford224_909.gif

Jun 26, 2011 | 2005 Chevrolet Impala

1 Answer

Windows dont work


You checked the DRVMDL fuse in the rear fuse box ? The rear fuse box under the back seat. Also the PWR WDO circuit breaker in the rear fuse box.

Power Windows Inoperative - All
Step
Action
Value(s)
Yes
No
DEFINITION: All power windows inoperative from all door window switches.
1
Was the Power Door System Diagnostic System Check performed?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Power Door Systems
2
Remove the PWR WDO circuit breaker.
Using a DMM, measure the resistance between circuit breaker terminals.
Is the resistance within the specified range?
0-5 ohms
YES - Go to Step 4
NO - Go to Step 3
3
Replace the PWR WDO circuit breaker.
YES - Is the replacement complete?
--
NO - Go to Diagnostic System Check - Power Door Systems
--
4
Using a DMM, measure the voltage between both rear junction block PWR WDO circuit breaker #57 terminals and ground.
Is the voltage within the specified range for either measurement?
10-15 V
YES - Go to Step 5
NO - Go to Power Distribution Schematics .
5
Repair CKT 1040 for an open or high resistance at rear junction block.
Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Diagnostic System Check - Power Door Systems

Jul 27, 2017 | 1998 Cadillac Seville

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...