Question about 1999 Ford Crown Victoria

3 Answers

Does the crown vic police intercepter take as much oil as the regular crown vic? (when changing the oil and filter)

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

I ~think~ the 1999 is the same as the 2000 (mine is a 2000 P71)

The 2000 CVPI (Crown Vic Police Interceptor) owners manual recommends the following:

Engine Oil - Motorcraft SAE 5W-30 Super Premium Motor Oil 5.0 quarts

Transmission Fluid - Motorcraft Mercon V ATF 13.9 quarts (fluids Mercon & Mercon V are NOT INTERCHANGEABLE, DO NOT MIX)

Fuel Tank - 19.0 gallons

Break Fluid - DOT 3


Rear Axle Lubricant - Motorcraft 80W-90 Premium Rear Axle Lubricant 3.75 pints (add 4 oz of Additive Friction Modifier C8AZ-19B546-A or equilavent meeting Ford Spec. EST-M2C118-A for complete refill of Traction-Lok Rear Axles)

Engine Data - 4.6L V8 Engine
Cubic Inches - 281
Required Fuel - 87 Octane
Firing Order - 1-3-7-2-6-5-4-8
Spark Plug Gap - 1.3-1.4 mm (0.052-0.056 inch)
Ignition System - Coil On Plug
Compression Ratio - 10.0:1

I hope this helps!

Posted on Apr 05, 2013

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 7 Answers

Yes, depending on the year it could be 5 or 6 quarts.

Capacity:
-02: 5 quarts
03+: 6 quarts
5w30 is speced for -00 4.6ls, 5w20 for 01+

Posted on Jun 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I would say so. It should take 4 quarts or 5 liters anyway.

Ross

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have p1747 code will that lite up the red light top right corner of my dash on a 2000 crown viv police intercepter


That is a transmission code...

P1747 (EPC Shift Solenoid). Not uncommon for police interceptors...

Here is a discussion of other possible causes:

http://towtalk.net/forum/topic/2000-Crown-Vic-Police-Interceptor-.htm

May 13, 2015 | Cars & Trucks

1 Answer

I have a 2003 police intercepter crown vic. the trans slipping when I take off.


have you checked the transmission fluid? car should be on level ground with car running.

Sep 07, 2012 | Cars & Trucks

2 Answers

I have a 1999 Ford Crown Victoria Police Interceptor with a bad transmission. Will any transmission from a 1999 or 2000 Crown Vic. or Grand Marquis work as a replacement?


MOST INTERCEPTER CARS, MEAN THEY HAVE AN ADDED GEAR IN THE TRANSMISSION! WHAT YOU'LL BE DOING IS GOING TO A TRANSMISSION WITHOUT THAT EXTRA GEAR! TO ANSWER YOUR QUESTION: YES YOU CAN REPLACE IT WITH A REGULAR TRANSMISSION! YOU JUST WON'T BE ABLE TO CHASE BURGLARS! HAHA

Mar 04, 2011 | 1999 Ford Crown Victoria

1 Answer

I have a 1998 ford crown vic police intercepter and the transmission is sticking in first gear and when i let off the gas it shifts. what could be the problem? and oh i already did a trans flush.


thereis a transmission module i believe, and that tells it when to shift. if they didn't have them in that year model, then a vacuum line will also cause that

Nov 12, 2010 | 1998 Ford Crown Victoria

1 Answer

I put a 1997 4.6 police intercepter engine in a 92 crown vic but i am having problems with wiring. what should I do or what can I do


you need to describe the problems.

The engine computer may not be compatible with this engine. It may require the PCM from a police intercepter vehicle. Do you have the calibration code from the vehicle the engine came out of?

Most of the sensors and actuators are the same for police and regualr car for the same model year. You probably need a wirng diagram book for a 1992 and a 1997 so you can compare.

I may have one or both. If yes, I would sell fro $7 each plus $2 shipping each. Let me know and I will look.

Oct 29, 2009 | 1992 Ford Crown Victoria

1 Answer

Crown vic oil change


Some of them have an oil plug at the front of the pan, as well as the regular one. You have to drain them both. The front one only holds a quart or less.

May 21, 2009 | 1990 Ford LTD Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...