Question about 1999 Honda Prelude

2 Answers

Honda accord doesn't pass 3000 rpm and start jerking

Posted by on

  • Da Gracias
    Da Gracias Jan 31, 2013

    Problem solved: The alternator was loosing power do to a leaking power steering pump located right above it... In order to do a quick diagnoses if you can unplug the round connector on the back of the alternator, start and run you car around the block! If the alternator is bad it sound run fine... plug it back and take it around again, the systems starts acting up again... change your alternator and fix you power steering pump, if leaking...

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Crank angle sensor located in the distributor.. buy a whole distributor from a junk yard. you will save a lot of money

Posted on Mar 03, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

Cam timing out or rotor. good luck.

Posted on Sep 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99-2000 2.3 Honda Accord won't pass 3000 rpm?


could be anything....throttle position sensorm pedal position sensor, fuel starvation of some kind. dirty filters . Insufficient fuel pressure. You might give much more detail.
A visit to a garage might not be a bad idea though, an on the spot diagnosis might be best

Aug 01, 2015 | Honda Cars & Trucks

1 Answer

I have an 87 honda accord and it keeps pulling in hi rpm when I drive it it usually stays around 3000 rpm when driving it what could be the problem it jerks it also when I'm driving


Auto Trans?

No converter lock-up------ a possible & chatter

Lack of TCC bad solenoid if your lucky

International Lubricants --has a product for that

The people that make LubGard Additive

Check their web site

Nov 24, 2012 | Cars & Trucks

1 Answer

Why is my honda accord jerking while driving When


IAC or MAF sensors could cause especially at idle

Sep 02, 2010 | 1993 Honda Accord

1 Answer

1986 HONDA ACCORD IDLES TOO HIGH 3000-3500 RPM


It may be caused by a vacuum leak, make sure to check all your hose for cracks and/or hoses that may have popped off

Mar 29, 2010 | 1986 Honda Accord

1 Answer

I have a 2001 honda accord 3.0 v6 , i wash the engine after i run it and it keeps shutting down , and also it jerks a lot at 3000 rpm


You got water into the distributor cap. Easy fix though. Unscrew and lift the distributor cap and spray some WD40 in it, which will dissipate/dry the water. Wipe off excess with rag or paper towel and put the cap back on. Now it will run like a Honda...

Mar 12, 2010 | 2003 Dodge Stratus

1 Answer

2005 honda accord diesel, Jerking when accelerate


1: Change your fuel filters and bleed the air out of it.
2: Check all rubber hoses for loose hose clamps and
cracks or leaks.
Almost certainly in one or both of the two points above.

Oct 15, 2009 | 2005 Honda Accord

1 Answer

Jerks at ~3000rpm


clutch maybe? could be sensor or computer.

Aug 21, 2009 | 2004 Honda Accord

1 Answer

2004 Honda Accord Jerks ~3000 rpm


well give it another 10-min and try it again haha no give it some time then go drive it for about 30-min and see if that does it

Aug 20, 2009 | 2004 Honda Accord

1 Answer

97 accord 4 cyl shuts down at 3000 rpm


run engine codes, had same issue once before it was bad computer good luck

Jul 06, 2009 | 1992 Honda Accord

1 Answer

Can't pass 3000 rpm


need to check codes and see if it has oil in it. and go from here.
if the computer sences low oil pressure it sets a rev limiter to try and save the engine. code P1259 i think. 4 or 6 cyl?

Dec 18, 2008 | 2000 Honda Accord

Not finding what you are looking for?
1999 Honda Prelude Logo

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...