We had the same problem in ours and the shifting was not affected. Also, engine idling was fine. When we changed ours, the only thing that changed was the check engine light went off. If your light is not on it could have to do with the transmission and a mechanic is best suited for diagnosing that.
SOURCE: tps sensor
There are 2 screws that hold the TPS on to the side of the throttle body. Before you take the old TPS off, note where the TPS is located regarding the adjustment slots. Remove the 2 screws, and remove the old TPS, install the new one, and try to achieve the SAME adjustment. If you get the adjustment wrong, the engine will idle up & down. If it does, move the new TPS slightly until the idle smooths out.
106 views
Usually answered in minutes!
×