Question about 2003 Buick Park Avenue

1 Answer

2003 buick brake rotor socket

2003 buick brake rotor socket

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Remove wheel. Remove caliper. Remove rotor with hands by pulling towards you.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do I use to remove a front rotor?


You don't need a socket. The rotor is held by a torx flathead screw. I stripped mine and drilled it out. It is not necessary. Remove the brakes and this little screw from the rotor and it will come off. If it won't. you need to watch a you tube video about removing a stuck rotor. It is fairly simple. But hard to explain in words.

Jun 22, 2014 | 2006 Buick Lucerne

1 Answer

2003 buick rendevous vibration


A proper front-end inspection would be needed to determine if indeed the vibration or shimmy you are having is from a loose/worn front-end components.It is not unheard of to received defective "new" rotors.

Dec 03, 2013 | Buick Cars & Trucks

2 Answers

Pulsating brakes


you could try the abs pump itself try getting one from a breakers yard
hope this helps

Oct 22, 2013 | 2003 Buick Century

1 Answer

What tools do I need to change the front brake pads on a 2003 buick regal?


heres a good link for you,, http://wiki.answers.com/Q/How_do_you_change_the_brakes_on_a_Buick_Regal your going to need wrenches, sockets , vice grips or channel lock, a C clamp 4" or larger to compress the cylinders , Brake clean ( spray can) and patience !! Good Luck

Aug 12, 2011 | 2003 Buick Regal

1 Answer

How do I get stuck rear rotors off of a 1196 Buick


tap on it with a hammer should loosen it up. Check for retaining clips on 1 or 2 lug nuts that were sometimes put on to keep the rotor on. Also, I have run into one time having a screw that holds the rotor on that is between the lug nuts that you will need an impact socket to get off, but hopefully you don't have that.

Also, make sure you don't have the emergency brake on as they are holding the rotor in place like a drum brake on the inside of the rotor.

Jan 08, 2010 | 1996 Buick Century

2 Answers

Brakes shuddering, traction light on. happens at low speeds, usually during left turn with brakes lightly applied.


Have your brake pads and rotors checked sounds like you may need to have your rotors turned.

Jul 08, 2009 | 2003 Buick Rendezvous

2 Answers

How do I change the rotors on a 2003 buick rendezvous?


You will find two bolts on the back side of the caliper that go into two small rubber boots. Likely the bolt heads on yours are torks head and need appropriate socket to remove. You need to retract pads in order to easily remove caliper from rotor. Retract further with a large "c" clamp before re-installing pads. Lube slides that attachment bolts go through (I use white grease for this) before re-installing them. Be careful to not cross thread bolts when putting them back in.
Good luck, and don't forget to rate this answer!!!

Mar 25, 2009 | 2003 Buick Rendezvous

1 Answer

What type of socket and size do I need to take off


you can go to any advanced auto parts store, and rent a axle nut socket set.. in most cases it a 28 to 36 mm socket.. go to advanced, you will have to pay for the set, but you will get your money back when you return the socket set..good luck keith..

Mar 14, 2009 | 2003 Toyota Highlander

Not finding what you are looking for?
2003 Buick Park Avenue Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...