Question about 1995 Ford Escort

1 Answer

Cooling fan doesnt come on at all

I have replaced my radiator and replaced thr radiator fan assembly and i have everything hooked up properly and the fan still doesnt come when it is supposed to.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

1 step cheack power to fan if no power
2 step cheack relay and fuses
3 step if there is power at fan then repalce waterheat sending to the computer

if non of that works and you have power to fan replace the fan motor

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove and replace the water pump on a 2006 Chrysler 300 hemi 5.7 l.


5.7L Engines

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable.
  3. Drain the cooling system.
  4. Disconnect negative battery cable.
  5. Remove the upper radiator hose.
  6. Disconnect cooling fan electrical connector.
  7. Remove cooling fan mounting bolts.
  8. Remove the radiator cooling fan assembly from vehicle.
  9. Remove the radiator fan assembly.
  10. Remove accessory drive belt.
  11. Remove thermostat.
    NOTE The water pump mounting bolts are different lengths. Note the location of the water pump mounting bolts.
0996b43f80200d65-mw3da2o1okphbx00ygfzxzdl-4-0.jpg To install:
  1. Install water pump and mounting bolts. Tighten mounting bolts to 20 ft. lbs. (28 Nm).
  2. Make sure double ended bolt is in the proper location. Tighten double ended bolt to 20 ft. lbs. (28 Nm).
  3. Position the radiator cooling fan assembly in vehicle.
  4. Install cooling fan mounting bolts. Tighten to 50 inch lbs. (6 Nm)
  5. Connect the cooling fan electrical connector.
  6. Install the upper radiator hose.
  7. Install thermostat.
  8. Install the accessory drive belt.
  9. Install the radiator fan assembly.
  10. Connect negative battery cable.
  11. Fill the cooling system.
  12. Pressure test cooling system.

Mar 16, 2017 | 2006 Chrysler 300

Tip

How to test and replace radiator cooling fan.


Hi.

Here a tip illustrating steps to test and replace the radiator cooling fan and the parts that may cause cooling fan malfunctioning.

Before replacing the fan, make sure that the fan is really faulty.
Read volts at fan contacts or jump the fan wiring to energize the fan directly.Ensure that fan blades are not blocked.

If the fan is OK, then the faulty part is either thermostat or fan relay.Ensure also that you have tested the 15A fuse in the junction block and the 40A fuse located in the Power distribution Center (PDC).

Here a diagram showing the location of the fan relay:

34b88b5.gif

Finally, here below the steps required to replace the fan. The procedure is quite simple.

  • Disconnect the battery negative cable and set it apart.
  • Disconnect the electrical connector to the radiator fan.
  • Undo the bolts that hold the top fan housing and fan assembly (this is called Radiator Shroud).
  • Remove the Radiator Shroud housing.The radiator shroud will come out with the fan sliding toward the top side.
  • Install the new fan performing the operations in reverse order.

Here a diagram showing radiator shroud and cooling fan assembly:
181f72a.gif


Regards.

Ginko.

on May 25, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Replaced radiator, filled it with antifreeze


Likely somebody didn't hook up the fan(s) properly when the radiator was replaced.. OR ... hopefully, this wasn't a case where the original problem with the car was the cooling fans not working.... and somebody diagnosed the problem as a clogged radiator????? I had the same problem recently with the fans not working, and the problem was a relay switch that turned on the fans when more cooling was needed.....

Aug 07, 2014 | 2000 Toyota Camry

2 Answers

Overheating at high speeds on a 67 Mustang. Have replaced thr radiator, water pump, thermostat and flushed the system, still over heats at highway speeds.


Has the fan shroud been altered or is it missing? It helps funnel the air thru the radiator to cool the engine. The fan may have been switched out with an incorrect one at some point, leaving a gap at the shroud which isn't allowing proper air flow.

Aug 23, 2013 | Ford Cars & Trucks

1 Answer

BARELY OVERHEATING WILL THE DEX COOL COOLANT HELP KEEP IT COOL IT SEEMS IF IT WILL LOWER THE BOILING POINT IT MIGHT HELP MY CAR ITS OK GOING BUT WHEN U SLOW DOWN IT SEEMS TO...


Hello: You need to check your thermostat, radiator for proper flow (radiator shop can flow check your radiator) Also if it overheats in traffic your cooling fan(s) may not be coming on. If you have air conditioning that is working start the engine turn the A/C on. Open the hood, the cooling fans should be running. You also may try flushing the radiator. Follow the directions for the flush procedure on the container. If the radiator has crud it may be cheaper to replace the radiator than repair.

Jun 15, 2011 | 1997 Chevrolet Camaro

1 Answer

How to change a radiator


1988–91 Models
  1. Disconnect the negative battery cable.
  2. Properly drain the cooling system into a suitable container.
  3. Disconnect the fan motor and motor connector.
  4. Disconnect the upper and lower radiator hoses.
  5. Disconnect and plug the automatic transaxle cooling lines at the radiator, if equipped.
  6. Disconnect the coolant reservoir overflow hose.
  7. Remove the radiator attaching bolts and brackets.
  8. Remove the radiator with the cooling fan attached.
  9. Remove the cooling fan and shroud from the radiator. NOTE: Check all cooling system hoses for any signs of damage, leaks or deterioration and replace if necessary. To install:
  10. Attach the cooling fan and shroud to the radiator and install the assembly.
  11. Attach the radiator bolts and brackets. Tighten the radiator bracket bolts to 7 ft. lbs. (10 Nm).
  12. Connect the coolant reservoir overflow hose.
  13. Connect the automatic transaxle cooling lines to the radiator, if equipped.
  14. Connect the upper and lower radiator hoses.
  15. Connect the fan motor and thermo-switch wire connector.
  16. Refill the system with the proper type and quantity of coolant, check for leaks and bleed the cooling system.
  17. Reconnect the negative battery cable. Fig. 7: Cooling system components — 1988–91 engines 86833085.gif
1992–95 Models
  1. Disconnect the negative battery cable.
  2. Properly drain the cooling system into a suitable container.
  3. Disconnect the fan motor and motor connector.
  4. Disconnect the upper and lower radiator hoses.
  5. Disconnect and plug the automatic transaxle cooling lines at the radiator, if equipped.
  6. Disconnect the coolant reservoir overflow hose.
  7. Remove the radiator attaching bolts and brackets.
  8. Remove the radiator with the cooling fan attached.
  9. Remove the cooling fan and shroud from the radiator. NOTE: Check all cooling system hoses for any signs of damage, leaks or deterioration and replace if necessary. To install:
  10. Attach the cooling fan and shroud to the radiator and install the assembly.
  11. Attach the radiator bolts and brackets. Tighten the radiator bracket bolts to 7 ft. lbs. (10 Nm).
  12. Connect the coolant reservoir overflow hose.
  13. Connect the automatic transaxle cooling lines to the radiator, if equipped.
  14. Connect the upper and lower radiator hoses.
  15. Connect the fan motor and thermo-switch wire connector.
  16. Refill the system with the proper type and quantity of coolant, check for leaks and bleed the cooling system.
  17. Reconnect the negative battery cable. Fig. 8: Cooling system components — 1992–95 engines 86833086.gif
prev.gif next.gif

Aug 27, 2010 | 1991 Honda Civic

1 Answer

Radiator fan motor does not run


1. check the cooling fan fuses
2. supply battery voltage directly to the fan assembly plug
a. if fan is good
locate and test/replace cooling fan relay
b. if bad
replace cooling fan assembly
if still is not working check continuity cooling fan system circuit/wiring

Aug 19, 2010 | 1999 Nissan Quest

1 Answer

Need instructions on how to replace the cooling


Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Radiator upper crossmember
    • Fan motor electrical connector
  3. Drain cooling system below the level of the upper radiator hose.
  4. Remove or disconnect the following:
    • Upper radiator hose from radiator
    • Radiator fan fasteners and upper clip
    • Fan assembly by lifting upward to clear radiator
To Install:
  1. Install or connect the following:
    • Radiator fan assembly
    • Upper clip and fasteners
    • Upper radiator hose to radiator
    • Fan motor electrical connector
    • Radiator upper crossmember
  2. Fill cooling system.
prev.gif next.gif

Jul 17, 2010 | 2004 Dodge Intrepid

1 Answer

Want to replace the radiator on my 1997 ford thunderbird


Radiator Aluminum Core, Crossflow — 3.8L (Base) and 4.6L Engines
Removal
  1. Drain engine cooling system as described. Disconnect upper radiator hose (8260) and lower radiator hose (8286) and radiator overflow hose (8075) from the radiator (8005). Disconnect the transmission oil cooler inlet and outlet lines from the radiator.
  1. Remove cooling fan motor,fan blade (8600) and fan shroud (8146) assembly as described.
  1. Remove radiator upper bracket retaining bolts and remove bracket. Lift radiator from vehicle.
Installation
  1. Position the radiator into the vehicle. Install upper brackets and tighten bolts securely.
  1. Connect the transmission oil cooler lines to the transmission oil cooler fittings.
  1. Install cooling fan motor, fan blade and fan shroud assembly as described.
Engine Cooling Fan Motor, Fan Blade and Fan Shroud Assembly, Electrical Removal
  1. Disconnect (pull apart) the male-female cooling fan motor wiring connector at the side of the fan shroud (8146). Remove the male terminal connector retaining clip from the fan shroud mounting tab.
  1. Remove two fan shroud upper retaining bolts at the radiator tanks.
  1. Lift cooling fan motor/fan blade (8600)/fan shroud assembly past radiator (8005), disengaging fan shroud from two lower retaining clips.
Installation
  1. Follow removal procedure in reverse order.
  1. Tighten fan shroud retaining bolts to 5.2-7.2 Nm (46-63 lb-in).

  2. 10e2638.gif
    8d231fe.gif HOPE THIS HELPS.

    Oct 30, 2009 | 1997 Ford Thunderbird LX

    1 Answer

    1997 plymouth voyager radiator fans


    I don't believe your particular vehicle's cooling system needs to be bled during coolant filling, but check the coolant level first. It seems that the coolant level is too low for the sensors to be able to sense the temperature, or the sensors are disconnected. Look for a connector on the intake manifold, near the coolant outlet. Ensure it is properly connected.

    Aug 16, 2008 | 1997 Plymouth Voyager

    Not finding what you are looking for?
    1995 Ford Escort Logo

    Related Topics:

    148 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    fordexpert

    Level 3 Expert

    5501 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...