Question about 2000 Honda Accord
WHEN I PRESS THE LEVEL ON THE DRIVER'S SIDE DOOR, OFTEN THE TWO DOORS ON THE PASSENGER SIDE DO NOT LOCK. CAN THIS BE FIXED?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I promise this works 'cause I used it:
Put the key in the ignition, move the intermittent wiper control to the middle possition and then turn the key on.
just to clarify it's the ring that controlls the intermittent wiper speed and not the int / low/ high switch.
What this does is it resets the multiplex unit that controlls the accessories such as the power door locks. This problem usually happens once the battery has been removed or disconnected and reconnected. Every once in a while the multiplex systems lock up. Especially on the 98s. That's how you wake em up.
Posted on Mar 31, 2009
There are retaining screws around the handle and the door release handle. The screws may be covered with plastic circle cover. Take those out and just start pulling the plastic panel away from the door gently yet firmly. Once you get the panel loose lift up on the panel to get it off the door.. be careful or wires that may be connected to the panel when you take it off the door.
Posted on Sep 05, 2008
SOURCE: 2004 Honda Accord Euro. Central
If you can get hold of a door lock wiring diagram (maybe photocopied from the dealer?) and unplug the wiring connector to the door lock motor, put a testlight across the positive and negative terminals for the lock motor. If the light flashes on for a second or so when you press the remote button then the motor is getting power but not operating, so it is faulty. If there is no flash, either you've hooked it up wrong or there is a wiring or central lock module fault. The time and effort that you put into doing this is probably better spent on taking the car to the dealer, as their trained technicians will diagnose the fault quickly. And they'll probably go through the diagnosis procedure regardless of whether you've already done it, rather than replacing parts on the say so of the customer who may or may not have diagnosed the fault correctly (no offense intended).
Hope this helps,
Posted on Nov 02, 2008
Tips for a great answer:
Dec 21, 2012 | 2000 Honda Accord
Jan 07, 2010 | 2003 Honda Pilot
Nov 16, 2009 | 2000 Honda Civic
Nov 14, 2009 | 1993 Honda Accord
Sep 13, 2009 | 2005 Toyota Corolla
Aug 14, 2009 | 2000 Honda Accord
May 01, 2009 | Honda Accord Cars & Trucks
Mar 16, 2009 | 1997 Honda Accord
Jan 07, 2017 | 2000 Honda Accord
434 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: